开云体育

Well, great answers but i dont understand everything ,,i am not a tech as you guys! If i understand ,on the Micor PA i could connect some wires (on the PA circuit) so at the ainstant 250 mw would be

Randy, Do you have more specifics such as model (Micor, MSR, MSF, Quantar, etc), or at least the drive level you require. I have a 100w Micor UHF amplifier here that is excess to my needs, as

At 1/5/2025 11:36 AM, you wrote: I will disagree with your opening statement. Repeaters are NOT open unless the trustee decides they are open. Yes. Unlike 146.52, a repeater pair is assigned to a

I will disagree with your opening statement. Repeaters are NOT open unless the trustee decides they are open. Unlike 146.52, a repeater pair is assigned to a particular person or group in a certain

Good Day, All. In the U.S., all repeaters are "supposedly" open. All owners of 47CFR97 controlled systems are "trustees" under the rules and regs of the CFR. As trustees, you are responsible for

I am not familiar with the details of that radio, but higher power broadcast transmitters and industrial.controls use an air flow detector to confirm enough air flow for cooling. Just knowing the fan

Karl, The information you provided to Gervais is NOT correct. On a MICOR VHF power amplifier - you have to switch the A- (A minus) during transmit.? This logic can be sourced from the PTT of the

Gervais, ? The Motorola PA B- has to be switched in order for the amplifier to work (unless you modify it like I do). ?If you do have a "hot" PA be sure to protect it with an isolator and cavity if

How much are you wanting for each of the CM300s?

I just punched in the model number of the fan on Google and bought one from Mouser, exact fan, just 20 years newer lol. Was like $10 or something, it’s been about 2 years since I bought it.

I mentioned in a previous post I made this would happen.? You have to program the unit with a saved image you said you have on disk, using the CSS programming software.? Once done, your lock lights

I've used Burt's repeater and can say it is the highest fidelity thing I've ever hear on a 5KHz channel.

hi everyone, first Best 2025 to all of you ! and i appreciate a lot the tolerance of the Moderator when i arrived with some questions that are not full repeater subjet! i dont remember but on the

Greetings to the Group, Looking for a working Motorola UHF R2 (438-470 MHz.) 100 watt RF power amp. Thanks, Randy K9MMQ

There is a ham in So Cal that has been banned from several repeaters and from what I hear in most cases the repeater owner/trustees sent him a letter and may have copied the local FCC office. In one

At 1/4/2025 12:12 PM, you wrote: I built and maintained multiple repeaters on multiple bands, on multiple mode for me or for club/organisation.? In no time I feel that I can prevent anyone from

Chriss, encryption is illegal in Canada, unless the key is available for everyone to enter into your radio and be able to listen to the stream. Thank you for the clarification.

Chriss, encryption is illegal in Canada, unless the key is available for everyone to enter into your radio and be able to listen to the stream. This have been reported to me as being what ISDE said to

I built and maintained multiple repeaters on multiple bands, on multiple mode for me or for club/organisation. In no time I feel that I can prevent anyone from using a repeater but if it is being

Speaking of closed systems, some hams in Hamilton Ontario Canada (allegedly) have an encrypted DMR machine. Is that legal in Canada? I know encrypted transmissions are illegal on the amateur