开云体育

Scott, It will depend on the radio used. For most Mot. radios with the 16 pin connector, you don't need to do anything special in programming. For the CDM series with the 20 pin option connector, you

The return loss of the first cavity seems off. At 0.4 dB IL I would expect the match to be around -30 dB as you saw with the other two cavities. Is that the cavity that seemed to be giving you

The boards look like those made by Aerotron. A definite blast from the past of the late 1970's version I used to maintain for hospitals in 160 mhz at multiple sites in NYC and CT. There were lots of

Yes, this series (QT6700??) were bad about intermod even with a good band pass band reject on them. I ended up figuring it was mixing in the exciter. It could come in if there was any spot on the

Is anyone still making outboard CTCSS encode and/or decode boards? CommSpec?

Well, a year ago I codgered up substitution an Arduino Nano ($5) for the CTCSS encoder the DR2X requires if in the remote mode. I have the "script" you down load to the Aurduino and it outputs a PL

I can't answer myself, but I know you will need to be more specific. What radio? What software?

I may be wrong here, but I recall a lot of problems on Mt. Wilson, and other sites, to broadcast 940 MHz STL's as well as VHF radios from Quintron paging transmitters.? As I recall, it was when drive

What do I need to do in the motorola programming software and Windows 7 to config the RIM-Maxtrac wit work with Winlink or Vara FM.

Are there any CSI-32 controller folks on here??? I have the manual but the factory reset is not working. -- - Regards, Karl Shoemaker To contact me, please visit SRG's web site at

Hi folks, I have a 45w and a 90w 70cm transmitter and power supply and need manual or any info. See pics. Google showed install and setup manual for much later (Jan 93) VHF advanced version, but I

That's great news!

Cavity 1: -23DB Return Loss at Pass Frequency, 0.4DB IL at Pass Frequency, -30DB IL/Notch at Reject Frequency Cavity 2 (middle cavity): -30DB Return Loss at Pass Frequency, 0.4DB IL at Pass Frequency,

"Best" is subjective. The problem with that solution currently is some of the required products are unavailable.? The SC-50 and CT-30 are discontinued because the encoder/decoder IC in no longer

That would be great! Thanks Jeff. Tedd, VE3TJD

Looks small enough to be UHF. I can verify when I get home tonight. --- Jeff WN3A -- This email has been checked for viruses by Avast antivirus software. www.avast.com

No, this doesn’t sound right at all. There is either something very wrong with one or more of the cavities, the harness, or test equipment. Do this as a sanity check. Take the three cavities on the

You can do the same thing with version 7. ebay item 144675644126

Andy WJ9J wrote: Nothing - except that I can't find a copy of Ghost 8. Jim Aspinwall wrote: Which laptop did you use? I've been using two CF-series Toughbooks for radio programming just because they