Scott,
It will depend on the radio used. For most Mot. radios with the 16 pin connector, you don't need to do anything special in programming. For the CDM series with the 20 pin option connector, you need to plug the RIM into the center 16 pins and program the audio paths in and out for "flat" audio response.
That's the key here: Bypass as much of the radio's internal audio circuitry as possible - raw discriminator audio out, TX audio directly to the modulator.
Scott
Scott Zimmerman
Amateur Radio Call N3XCC
474 Barnett Road
Boswell, PA 15531
toggle quoted message
Show quoted text
On 11/1/2022 9:27 AM, SCOTT READ wrote:
What do I need to do in the motorola programming software and Windows 7 to config the RIM-Maxtrac wit work with Winlink or Vara FM.
