开云体育

I second what John, NI0K, said. I am running MCRS on two computers with AudioBox 1818 8-channel sound cards. Works well and has for several years. Tim Berry WB4GBI WB4GBI repeater systems

Indeed, the Micor and MSR2000 station card puller. Likely one was shipped with every station. It was a *LOT* easier to pull cards with this tool. Perfect candidate for 3D printing!

Just to back up your statement about the ballast resistors, Jeff, the first Henry amp I worked on I bought used, originally on 47 MHz, and someone had used it on 6M before I got it. All the ballast

https://www.abyssmedia.com/mcrs/ is what I use. The VOX operation is good and there are enough options for all kinds of recording scenarios. OTOH, there is free software available for all sorts of

Hello everyone, I'm using the bi7jta card for GM340 repeaters. It works well on FM. I have two problems: I get echo when users speak, as if they're using an echo microphone. The second problem is

That looks like the MSR-2000 card puller, may work in Micor stations as well. [email protected]> wrote:

Bob, I found a couple of these while packing up for the Dayton Hamvention. Is this the tool you're seeking? If not, do you know what model this is for? Lousy picture, sorry. Text reads "Motorola Base

I have a TE Systems 0552G 6m "brick" amp (not a repeater amp). It never made the rated 375 watts. On a good day with the wind at its back and a stiff 14 volts on the collectors it will do about 325

If you want to actually record just active audio (aka VOX) go to EDIT-->PREFERENCES-->RECORDING Enable Sound Activated Recording Set the slider to an appropriate spot to trigger on active audio 73,

You might get a quote above $2500 now Military has bought quite a few of them

AUDACITY - TRUNCATE SILENCE > That's after the fact as a cleanup - unlike pausing the recording when there is silence. W6CBS - Bill

Muffin fans usually last longer running 24/7 vs turning on and off with PTT. I've had fans wired for PTT that would fail about every 2yrs and when the same fan was wired for continuous operation I

Hi Dan, We have tuned up both TE Systems and Henry amps for 6M. I thought the TE amp was overrated for amateur service at above 300W and should have been rated the same as their commercial amp at 300

You can truncate silence. EFFECT-->SPECIAL-->TRUNCATE SILENCE https://manual.audacityteam.org/man/truncate_silence.html Joe, K1ike

Chris, I ran the program but it makes no sense to be nor has a vox feature found.? The documentation is in German, oh well.? Perhaps you can point me in the right direction ? For recording LIDs or

If TE doesn't work out there is a TPL 100w 47MHz amp and two 33MHz 250W Henry amps on fleabay. Either version should tune to 6m.

Historically their customer service is absolutely atrocious, their service the same. Your money might be better spent with Henry or Crescend. I seriously doubt TE is still around. Last time I saw Dave

Of course I do.? Been repairing 2-way radios since I went to work for Motorola in 1970.? Not my first rodeo!

ALAMOGORDO AMATEUR RADIO CLUB'S 39TH ANNUAL HAMFEST ARRL SANCTIONED 30 Aug ?2025 Otero County Fair grounds (in Alamogordo NM) 7am to 3pm-ish Admission: Free!!! Vendors can set up day before 3 to 7pm

Does anyone know if TE Systems is still in business? I sent them an email last Monday asking about pricing and availability of two six meter repeater amplifiers and have not received any response. I'm