开云体育

Thanks for all the advice.? I was able to extend the rods using stainless with mixed results: -on "duplexer A" I can only get about 30db of isolation per cavity, which from what I'm reading is not

Then why do you send a link showing it? "JEFA Tech Low Loss 400 is a high performance alternative to CommScope? WBC-400, Times Microwave Systems LMR?-400" Seems pretty clear. Why do you show this

Chad, the LVP2 is actually a cellphone with an RJ-11 jack for analog phones. https://www.verizon.com/home-office-solutions/wireless-home-phone-lvp2/ It's designed to be powered on 7/24 Only downside

Kevin, great idea. I will certainly work on that and provide that hopefully in the near future. WZ5TX David “Tyler” Bufkin ________________________________ Sent: Tuesday, March 4, 2025 6:26:17

Tyler, You should consider doing a write-up of how exactly you do the modifications to gain access to the discriminator and modulator. A good article would show the bandwidth available, how flat the

Wow, quite a bit of good ideas here, almost gets overwhelming to know which one to choose lol. If that one device, the ADA that Pierre was talking about sounds like that doesn't use the Internet, but

If you have internet access on site, voip.ms will serve you a phone line that you can use with a simple ATA like the Grandstream ht801 for a ridicule price of 90 cent for the telephone number per

I think you meant RJ11...unless you live in some far away galaxy where the telco serves POTS on 75 ohm coax? ? --- Jeff WN3A

Verizon LVP2 might be an option

Hi, I'm getting an AT&T US cellular to home phone interface box which probably would work, connect to the phone via Bluetooth. Someone at Walmart in the electronics department who was associated with

I know we’re drifting off topic here, but not long ago I needed 1500’ of 1/2" in a hurry and none of my usual go-to’s could get it to me. I ended up ordering ?” from TXM

Hey everybody.. ran into something interesting and was wondering if anybody had any insight on this. So when you look at the picture that I've attached here you can see those cheap little $12 repeater

Many cell phone carriers have a plan to "add" a line for $10/month if you already have service.? Some do have phone to cell interface, might have to buy it.? Just plug the RG11 from your autopatch

Just to throw my 2 cents in. I’ve built a few 220 repeaters over the past few years. I may get banned for saying this (lol) The TYT 9000’s make a pretty good setup. Modification is required. On

At 3/4/2025 12:15 PM, you wrote: Hi, I use these folks, they are across the river from me.?

The LMR 400 was just a picture on one page on the web site. Get a grip. LDF4 forever. (TARRA) via groups.io <tarra@...> wrote:

Hello, Unfortunately, I am unable to download the file of the original article written by hand by G8AMG. If anyone has the file and can make it available, I would be very grateful. The link above

Yep, I was thinking the exact same thing. That's all it is, nothing more. Chuck

Here we go with the LMR400, but I didn't say it! Mick - W7CAT

Exactly. The harness is the tough part - keeping the water out especially. Chuck WB2EDV