I have taken my master II parts from the base cabinet(need more roomin
the cabinet)and the tx died.
Well it sort of died, it does work when 10v is applied to the tx osc
leg, but not when the PTT leg is pulled to ground it does not. I did
replace the jumper on the control board cause the CTCSS is not used but
still no luck. I have about 8 volts little more on the PTT line(after
installing the jumper for ctcss) and the 10v reg is right at 10 volts,
on the dot. Is there a control transistor for the exciter i am
unfamiliar with the mobile layout of the Master II VHF mobile rig
--
Brent DeSalvo (KF4TNP)
ICQ UIN# : 17430698
Mailto:bug1@...
