On Fri, 02 Apr 1999 08:06:39 -0600, Bill Anderson WB9TEW wrote:
Last week I and another ham experimented with a MFJ 259B antenna
analyzer for tuning a set of duplexers. We found that it is a quick easy
way to tune the cans without dragging a lot of equipment to the repeater
site. Just set the signal generator part to the desired freq (not usable
above 170 MHz),
Unless the newer ones are better, I found that the VCO drifts
too much? I use it for checking the SWR going into the
duplexer, but how do you keep it on frequency for a couple
minutes at a time while tuning?
FYI...my 259 is about 2 years old.
Tedd Doda CET CEO
Lazer Audio and Electronics
packet ve3tjd@va3sed
e-mail lazer@...
