Hi Guys:
Can anyone point me in the right direction.....I started
tuning up my db-4032 6 meter duplexor and after setting
the cans, the SWR on the TX port is over 3-to-1. When I
got the set, it was set for TX on the low port and RX
on the high port. I have it set for the standard 6 split
of TX on 53.37, and RX on 52.37 (standard for Ontario).
Do I have to swap the open/close stubs to get this thing
to work properly?
Tedd Doda CET CEO
Lazer Audio and Electronics
packet ve3tjd@va3sed
e-mail lazer@...
