--
One more quick thing on a Mitrek. I have one on 440 I duplexed that is
deaf as a stump until the TX comes up. Then, the sensitivity is great!
As soon as the tail drops, it goes back to being deaf. Here's the
kicker: it ONLY does it when connected to the duplexer. It works
flawless if I connect the RX to an IFR to test the sensitivity. Deaf in
this case is 'you have to find the right spot to key it with the HT
on-site!' Sooo... any ideas out there???
Joe M.
Sounds the the diode that must be removed to keep the voltage on the rx is
not correct, would suspect that rx voltage is not right during normal rx
function. We have been using about 10 Mitreks for link radios on our 220
system.
Joe WB6HRO
