Very good, you Momma did not raise no fool.
de Rick kk5ric
toggle quoted message
Show quoted text
At 19:34 04-03-99 -0800, you wrote:
From: csnichol <csnichol@...>
Tedd,
I use on of these on my repeater. I got some conversion info from an
Engineer at Decibel
back in 95. The drawing is not an offical engineering drawing and has a
number mkt019/a
on it you might see if you can get it.
Cable measurements are cut lengths, connectors not included
Open the cans and trim the helix to 7 1/4 turns.
Pop rivet the cans back together
on the low freq side...
Can to Tee length 14 3/4
Shorted stub length 19 1/2
Interconnect (Qty 2)
29 1/2
On the high freq side...
Can to Tee length 29 1/2
Open stub length 21 1/2
Interconnect (Qty 2) 41 3/4
For the arms of the Y cable at the antenna port
41 3/4 Qty 2
I used the long stub to make the short ones.
I made new long stubs
I did not change anything alse in the harness as it was darn close and
it works for me.
If you cant get the document from decibel I will send you a copy.
Chris
N9LLO
Tedd Doda wrote:
From: "Tedd Doda" <lazer@...>
Hi Guys:
Anyone know where to find out cable lengths (open stubs,
shorted stubs) within the DB4032 duplexor? I have parts
of the owners manual, but what I need is missing.
The repeater is going on 53.37 tx, 52.37 rx.
Tedd Doda CET
packet va3sed@va3sed
e-mail lazer@...
------------------------------------------------------------------------
Start a new hobby. Meet a new friend.
Onelist: The leading provider of free email list services
------------------------------------------------------------------------
This list is sponsored by the owners and users of "RBTIP"
