John, Please, if you would, send me a copy of your notes. I am always
looking for improvements on my attempts to convert Mitreks to repeater
service.
Thanks.
Marvin - WB6PKK
At 10:24 AM 2/25/99 -0700, you wrote:
From: John Lloyd <lloyd@...>
Gary,
The Mitreks are easy to modify for repeater service. You will need to
reduce the
TX Power output since the heatsink is small. You will need to make a
shield over
the Channel Elements to get more Tx to Rx isolation. I will look up my
notes and
send them to you later on my duplex mods to the mitrek.
John Lloyd, K7JL
Utah VHF Society
--------------------
w7ntf@... wrote:
From: w7ntf@...
Greetings,
This is Gary, W7N TF, in Spanaway, WA. I have two UHF Motorola Mitrek
mobiles
that I was going to convert to repeater service before I got ahold of my GE
Mastr-II mobiles. I may still go ahead and finish the project and keep a
Mitrek for a backup repeater. Has anyone successfully converted a UHF
Mitrek
mobile for repeater service? Was it difficult, and what problems did you
encounter? I bought a pair of rocks for one of my UHF repeater frequencies
and found that one of the two Mitreks fails to transmit... The other
transmits
and receives ok, but still requires an alignment. I am looking for TXA,
RXA,
COS, and PTT connections in order to interface with my LinkComm RLC-2A or
RLC-1 Plus controllers. I'd like to hear from you... Thanks.
73, de Gary, W7NTF
------------------------------------------------------------------------
Did you know that we have over 85,000 e-mail communities at Onelist?
Come visit our new web site and explore a new interest
------------------------------------------------------------------------
This list is sponsored by the owners and users of "RBTIP"
------------------------------------------------------------------------
Come check out our brand new web site!
Onelist: Making the Internet intimate
------------------------------------------------------------------------
This list is sponsored by the owners and users of "RBTIP"
