On May 19, 2025, at 7:13?AM, Chris Boone WB5ITT via groups.io <setxtelecom@...> wrote:

?

No you need to open up the KPG software and set them yourself. They're programmable, they aren't fixed so you need to program the pins... did Ken save a copy of your code plug?

Chris WB5ITT?

On Sun, May 18, 2025, 5:10?PM Chad Nelson via <chad.nelson71=[email protected]> wrote:

They were supposedly programmed for the RC 210 but they don't work with that controller on board two. We just need the pin out for that port on the TK 8302 so we can program them correctly.

Chad Nelson WI9HF/WRPL979

Janesville Wisconsin

608-754-8671

Send from my spectrum iPhone 16.

On May 18, 2025, at 5:08?PM, Chuck Kelsey via <wb2edv=[email protected]> wrote:

? Are you saying that the pins were programmed for a different controller, not for the 210?

Chuck

On 5/18/2025 6:05 PM, Chad Nelson via wrote:

Ken from Arcom programmed those pins but they don't work for the I C2 10 repeater controller. My buddy needs to see pin out for that port.

Chad Nelson WI9HF/WRPL979

Janesville Wisconsin

608-754-8671

Send from my spectrum iPhone 16.

On May 18, 2025, at 4:40?PM, Chuck Kelsey via <wb2edv@...> wrote:

? My first thought is whether the accessory jack pins are programmed properly. I've not programmed this particular model, but other Kenwood radios need this done.

Chuck
WB2EDV

On 5/18/2025 5:30 PM, pschaffn via wrote:

Hi Chad

?

? What? does not work?? ? I run them they work great.

?

Pat? ?kc8cse