On Apr 18, 2025, at 6:00?PM, Don Clark via groups.io <kb5kwv@...> wrote:

? All of the cables both between the cavity "T"'s and the antenna "T" is the same.

On 4/18/2025 12:41 PM, James Kossow via groups.io wrote:

Sorry about the name/person mix up! That is close enough for me!? What about the cable lengths from the cavity to the Tee for the antenna?? Are those the same too?

?

TNX Jim

?

Sent from

From: [email protected] <[email protected]> On Behalf Of Don Clark via groups.io
Sent: Thursday, April 17, 2025 5:37 PM
To: [email protected]
Subject: Re: [repeater-builder] Wacom WP-678 Cable lengths

?

This is the wrong Don, but I just measured a couple of mine.

This is tip to tip of the male pin. Very close to the end of connector also.? 3.74"
Or 3.737" to 3.745", and I doubt you can cut a coax that close, along with my measuring errors.

Don
KB5KWV

On 4/17/2025 3:20 PM, James Kossow via groups.io wrote:

Dan thank you for your reply, can you get me the exact measurements of the cavity-to-cavity cable length and the cavity to tee (antenna tee) length?

?

Thank you,

?Jim?

?

?

?

?

?

?

On Tuesday, April 15, 2025 at 08:43:21 AM PDT, James Kossow <jim.kossow@...> wrote: 

?

?

?

?

?

It is the one port version.?

?

TNX jim.?

?

?

On Apr 15, 2025, at 6:48?AM, Jeff DePolo WN3A via groups.io <jd0@...> wrote:

?

?

?

????* I have a Wacom WP-678 that is missing the interconnect cables.? 

????*???

Is it a WP-678-R2 (two ports per cavity) or an original WP-678 (one port per cavity with a tee on top)?

?

??????????????????????????????????????????????????????????????????????????????? --- Jeff WN3A

?

?

?

?

?

?

?

?

?

Virus-free.