Re: Andrew 7/8" Hardline Connector Needed
开云体育Jeff, You are correct and I did not note that in Charle’s offer/comments. It is not a spiral type cable. BTW Jeff..I’d still like to have some direct communication with you if at all possible. My email is good on QRZ if you care to check. TNX – Mike, K4CVL ? From: [email protected] <[email protected]>
On Behalf Of Jeff DePolo WN3A via groups.io
Sent: Monday, March 17, 2025 10:01 AM To: [email protected] Subject: Re: [repeater-builder] Andrew 7/8" Hardline Connector Needed ? Just to make sure we/you/all are on the same page, Mike’s cable is not helical (spiral) corrugation so it wouldn’t be Phelps-Dodge (FXCC series). ? ??????????????????????????????????????????????????????????????????????????????????????????????? --- Jeff WN3A ? From:
[email protected] <[email protected]>
On Behalf Of Charles Adams via groups.io ? Hi The 7/8” cable you have is probably Phelps Dodge with solid center and spiral outside. No soldering required. We have a few used (cut off) connectors laying around, which I would offer FREE if you send me a UPS shipping address. (No PO Box) ? Regards, ? Charles F. Adams K3HKZ Industrial Communications Co. 121 N Sitgreaves Street Easton, PA 18042 Office 610-253-1214 Cell 610-360-0050 Fax 610-253-4504 ? From:
[email protected] <[email protected]>
On Behalf Of Jeff DePolo WN3A via groups.io ? Prodelin, Cablewave, and Phelps-Dodge all made 7/8” with a solid center (copper-clad aluminum, akin to ?”).?? Pics and details to follow… ? ??????????????????????????????????????????????????????????????????????????????????????????????? --- Jeff WN3A ? From:
[email protected] <[email protected]>
On Behalf Of Matt ? I interpreted your description a tad incorrect lol. Since Andrew never had a solid center in 7/8. I previously had a fella say he had 7/8 with a solder center but he didn’t know. ? Matt ? From:
[email protected] <[email protected]>
On Behalf Of MIke Ryan via groups.io ? Nope…that center pin screws into the center conductor. The type I need would SOLDER onto the center from what I see. But, thanks.? - Mike ? From:
[email protected] <[email protected]>
On Behalf Of Matt ?
? Matt AL0R ? From:
[email protected] <[email protected]>
On Behalf Of MIke Ryan via groups.io ? I have a length of the older SOLID CENTER CONDUCTOR 7/8” hardline and need one connector. I am not particular about the gender but an “N” female would be most useful. If one is available please contact me off list with your price including shipping to 34221. I would like to have this mid week next week if possible. If you do not HAVE a connector but know what MODEL NUMBER this type is, it might also be helpful. The cable is NOT the very old SPIRAL type but is the concentric circle type solid center. Thanks in advance.
? |
MIke Ryan