Chris,
other thing too, I looked at the station operation controls and briefly rx mode says active then switches back to inactive.
Thanks
--Don
toggle quoted message
Show quoted text
On 3/11/25 17:14, Don Wisdom KD7WKF via groups.io wrote:
Hi Chris,
The USB-RIM is set to use an active high signal for both COS and CTCSS. ?I have the PL line set in the wildcard however I just noticed that there isnt a output for pin C2 in the output group settings.? There is an output for pin C4.
Other thing the wildcard checkbox is greyed out on the system configuration screen.
Thanks
--Don
On 3/11/25 04:37, Chris Boone WB5ITT via groups.io wrote:
Wildcard programmed in the MTR? I take it you're using a transistor inverter to talk to the USB which normally requires a low going signal?
Chris WB5ITT
On Mon, Mar 10, 2025, 7:48 PM Don Wisdom KD7WKF via groups.io < groups.io> <dwisdom-lists@... <mailto:[email protected]>> wrote:
??? All,
??? I have a MTR2000 here that I have interfaced to a USB-RIM module, I
??? have
??? it working in COS mode but want to run a ctcss code on it.
??? I was curious does anyone know if anything special needs to be set for
??? the ctcss valid pin to go high to tell the RIM that the correct PL/
??? ctcss
??? is valid?? I cant get the ctcss lead to go high to tell the RIM that
??? there's a valid ctcss code.? When I key up my handheld with the correct
??? ctcss code on it it initially says keyed under the signal status.
??? Ive tried several mixtures of settings.
??? Under Audio I have Analog RX Activation set to PL
??? Under channel info I have decoder set to RX PL of 67.0
??? I am using the ICS-CTRL MTR2000 Adapter board that goes to a DB9. Its
??? pulling from C2 for PL Detect & B4 for COR.
??? Thanks!
??? --Don
------------------------------------------------------------------------
This email has been scanned for spam and viruses by Proofpoint Essentials. Click here < report_spam.php? mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5f577f6a7f4e1a88ac1d47bcf2c53d3807385ae2230f669c04048c6c78d9bac1307256a11a78a76a955c538c168c47ac2eb53d690026f4a2a3b24ef7fa5b3911d564f8dbe210224514c9cc909bd3d3be91e95469ebc24d1ea94a992d70e93442cfe28dfa80f47b21b1e16199b16adabd4cc8359d84e790de32176bacd6b6cc60ea079127f6ade61e1518c4bd5e858013e0363796f47a18b838> to report this email as spam.
----------
This email has been scanned for spam and viruses by Proofpoint Essentials. Visit the following link to report this email as spam:
mod_id=11&mod_option=logitem&report=1&type=easyspam&k=k1&payload=53616c7465645f5fc124d7e359c0d931f2618bd4777537955025669c4cf03fbe99daf3923a58ea73990e0d86747fc4d1b18ff00d2263c17201ddcec68a653397c319c237ef69e76f78ed58917ce4e103b50f0eb39c5640e327fd772d2ec5d79d5e79df9ca63b9a86ac2d84a5e79c87925a3595804ba1925c02312a0f20980ca0555e4fcb2c18f1b089368b4c847fd1f79a210fa75aeca9c2f7135b3aaa366784
