On 2025-03-05 10:04 p.m., Peter via groups.io wrote:
Thanks for the tuning information.? I'll admit that most of this is
new to me so I'm still a little lost, but slowly figuring it out and
reading everything I can find. I've tried rotating the elements and
was able to get 25db per cavity on one and now 30db per on the other
but still not what I was expecting.? I also think my harness is the
high version based on their original frequencies.
<---What's the Insertion loss, and then the Return Loss at the pass
frequency?
What instrument are you using for the tuning (and did you go through a
calibration to net out cable losses, etc)?
Did you try Dave's method?
Cheers,
Ramesh, VA3UV, WA3UV
