Re: Antenna for UHF made in Ukraine-Additional
|
Hi,
I use these folks, they are across the river from me.? Never disappointed!
73 dave wa3gin
Messi & Paolini in Italy makes, at least? in my mind, top quality direct bury 75 ohm coax with flooded copper braid, long lasting polyethylene jacket, etc and ships to USA in 3 days, at a reasonable cost. Order direct from their web site.
?
John
---------- Original Message ----------
Date: 03/04/2025 1:44 PM EST
Subject: Re: [repeater-builder] Antenna for UHF made in Ukraine
?
?
Looks like they make a 4 bay for 220 MHz- $585 plus shipping from Indonesia!
?
You might have to make your own harness, from 75 ohm cable?, The mast is not supplied, of course.
?
John
On 03/04/2025 11:13 AM EST Bob Dengler < no6b@...> wrote:
?
?
At 3/4/2025 07:53 AM, you wrote:
I'm in this group to learn.? I've never put up a repeater antenna or had to resolve intermod issues due to PIM, etc.?? So take what I'm suggesting below with that in mind...
?
It looks to me like the guy in Ukraine who is making these folded dipole arrays is presumably trying to do a good job.? If someone on here with technical knowledge feels that his products, if properly constructed, would benefit the amateur radio community, maybe consider giving him a little guidance as to what he might need to do better with his antenna design and construction.
Right now this looks like one of the better options:
<>
4 of these & make your own phasing harness with RG-214.
Bob NO6B
|
Dave Jordan