You don't need the control panel to have a working repeater... just a 1/10 inch Berg jumper.
Yes, the pin spacing is 1/10 of an inch.
I have around 25-28 R1225s in operation on a mix of amateur and commercial frequencies with this
setup on the front of every unit:? http://www.repeater-builder.com/motorola/r1225/pix/r1225-with-berg-jumper.jpg
Every site (all 9) has a GM300 head stashed in the hilltop rack to serve as a programming jig and test speaker.
Until I was informed about the GM300 head trick I was using this to program the R1225s:
http://www.repeater-builder.com/motorola/r1225/pix/r1225-programming-adapter-2.jpg
Yes, I have a few of the HLN9514 control panels, one at the bench, one is the shop's 4x4 service truck toolbox,
and one in my personal toolbox but the GM300 head does 99% of what I need and if one evaporates from a
site it's not a disaster.
You might find this page interesting:???
And if anyone has a PDF of the GR1225 tabletop repeater manual I'd like to have it to post on repeater-builder.
Likewise if anyone has a paper copy of the HVN9054 RSS?/?CPS manual that was packed with the RSS / CPS?
disks (it was never available by itself) I'd like to borrow it to scan.
Mike WA6ILQ
