¿ªÔÆÌåÓý

  1. Repeater-Builder
  2. Messages
Single Messages Topics Expanded Polls

Re: Regulator - 12vdc to 5vdc for Raspberry Pi

 
Edited

I purchased ASIN?B06Y58WLX9, but the one you linked says it is a variation of the one I had already bought so I think it would be the same or close enough.
?
Squeeze the top cap with some vice grips and it pops off (careful to grip and squeeze as high as you can on the body). There are two screws on either side of the round PCB inside, then the guts pull out. Solder points should be obvious.
?
See https://cloud.hamoperator.org/s/jcraYAbzBxA2mxc
?
Danny
?

From: "jeremy_georges via groups.io" <jeremy_georges@...>
To: "repeater-builder" <[email protected]>
Sent: Wednesday, January 6, 2021 5:42:07 PM
Subject: Re: [repeater-builder] Regulator - 12vdc to 5vdc for Raspberry Pi
Hi Danny,

which Amazon Basics adapter are you using? Looks like they have a few different ones.

here is one rated at 4.8Amps
Join [email protected] to automatically receive all group messages.