Multicast might be easier... we have a couple of four site multicast sites operating in our area... poor man¡¯s way is w/ same repeater input, different squelch codes, and different transmitter frequencies. One county ties the four repeaters together at the console... and ours uses RF links between the four sites, via a rock and mobile radio.?
toggle quoted message
Show quoted text
On Sep 10, 2018, at 4:28 PM, Matthew Kaufman
matthew@... [Repeater-Builder] <
Repeater-Builder@...> wrote:
?
Another thing to think about is to do what a few fire departments around here have done... add another site, use the same input frequency at all sites with a voter, but have different outputs. Yes, you'll need another frequency coordinated, but you were going to have to do most of that for simulcast anyway.
Both San Mateo County and Monterey County, California are running setups like this.
Matthew Kaufman
Hey guys,
OK, so here we go.? I've been given a challenge, to help an fd get
better coverage.? We've gotta take this 1 step at a time.? So right
now they are on vhf.
They have a single site repeater.? We're thinking simulcast right now.
The repeater is a quantar.? So, keeping the current repeater in its
current home, let's ay we add 1 more to the mix, doing a simulcast,
what would we need?
This is my 1st simulcast adventure, and i actually wanna learn more
about it to help them out.
Thanks,
Jed
------------------------------------
Posted by: Jed Barton <jed@...>
------------------------------------
------------------------------------
Yahoo Groups Links
<*> To visit your group on the web, go to:
? ?
<*> Your email settings:
? ? Individual Email | Traditional
<*> To change settings online go to:
? ?
? ? (Yahoo! ID required)
<*> To change settings via email:
? ? Repeater-Builder-digest@...
? ? Repeater-Builder-fullfeatured@...
<*> To unsubscribe from this group, send an email to:
? ? Repeater-Builder-unsubscribe@...
<*> Your use of Yahoo Groups is subject to:
? ?
