At 10:27 AM 6/2/99 , you wrote:
I did fuse. When you said I was running too much current through it, it
starts to remind me of what their techs said. Let's see.... you attach
-12v to the ground pin, +12v to the voltage in feed through. I used a
separate 2.5 Amp regulated power supply. Ah, tell me if I'm wrong, but
isn't the current flow dictated more by what's IN the box than what's
outside it? If a 100W light bulb pulls 25 amps, do I blame to power
company for giving me too much current?
It still sounds like a current loop of some type. And, a good technician
doubts everything, even himself, until he finds the problem..... ;-)
73, Joe, K1ike
