Re: Installing SDRPlay RSP with SDRPlay2RSS and Radio-Sky Spectrograph
|
Thank you Larry. It works now.? At first, after following the procedure you attached earlier, everything started well until SDR-Console was not recognising my SDR-RSP1A receiver. So, I had to visit SDRPlay.com to download the right Windows API (3.07) and finish its installation with the receiver on my PC. Then, I followed the procedure again. I also selected the RTL Bridge/TCP option for the?Receiver RTL Bridge.
Below are the attached screenshots for your comments. Screenshots 2025-04-29 171346 and 171433 .jpgs represents the output after complete installation and initial testing. Screenshots 2025-04-29 171615, 171741, 171800, 171829, 171858, 171929 .jpgs represents observed jovian emission from my location.
Thank you Stephen for your feedback. It will come handy any time I use SDRUno.
Regards,
Eugene Idogbe
We used to get that same error message after we had closed the SDRuno program using the "x" in the top-right corner. For some reason, it is best to go to "File" then "Exit" to avoid that "system argument error." That said, the fix for use was to just restart the computer and try again. Hope that helps. ? Stephen Atwood he/him/his Science Teacher Marquette Senior High School
Eugene, OK.? The procedure is attached. Larry Eugene K4LED
On 4/14/2025 11:03:21, Edenia via <eugeneidogbe23=[email protected]> wrote: Hi Larry,
Thank you for the feedback.
I have tried the option of installing SDRuno. Version 1.3. After the initial uninstalling the SDRuno. Version 1.42.1710 and reinstalling the v1.3, and rebooting it still wasn't working? with error an popup (see attached).
I would like to try the second option.
Please, send me the instructions and links.
Regards,
Eugene Eugene, Try uninstalling SDRuno and then install an older version of SDRuno. Version 1.3. Reboot after uninstalling and reinstalling the old version. That often will fix that error you¡¯re getting. The SDRplay2RSS isn¡¯t compatible with the newest version of SDRuno nor Connect. If that does not work I¡¯ll send you the instructions and links for the newer SDRc2RSS and download SDR Console. That will work for you. Sorry you ran into that issue but we will get it fixed for you.?
Hi everyone,
So, I got an RSP1A installed with SDRuno on a windows 11 OS and a dual dipole antenna to set up a radio jove station located in?Nsukka, Nigeria. I followed the Reeve RSP installation user guide (file attached). I can't?move forward because on clicking the integrate button to finish the process of setting up the SDRPlay2RSS tool (see N0.5 f of Reeve_RSPInstall.pdf) the button does not turn Yellow and I am getting an error?message- System.ArgumentException (see SDRplay_2RSS -error.jpeg attached).
I would appreciate any assistance from the house to resolve this issue.
Regards,
Eugene
|
Edenia
