开云体育

When I was there last Fall, sidewalks were still coping with hurricane debris. Is that pretty much cleaned up now? Jack, W8TEE

This week I took my kx3/ax1 down to Siesta Key Fla for a little r&r. I haven't taken my kx3 on a trip like this before. Set up on the intercostal waterway patio and with little difficulty made 15

On 3/28/25 I had a CW practice / rag chew session on 20 meters. I worked three stations. I even worked some DX: Date / Time Call Bnd Frequency Mode Power Rec Snt Name SPC# Comments Off 3/28/2025 14:00

We had nine folks join the MI QRP Zoom Chat on 27 March. Please join us Thursday April 03 (and every Thursday) at 4PM Eastern for the Michigan QRP Club weekly QRP Chat where the main topics will be

Mark, Congratulations on 54 years as a Ham and thanks for the contest exchanges over the last few years! I'll try to make it to the Stomp. 72/73 Donald

I think I met her on a dating app many years ago. She's really let herself go... Jack, W8TEE

Sasquatch Stomp Mark Prather - WB9HFK Celebrating my 54th year as an Amateur Radio (Ham) Operator.

Adam also released STL's and plans for making a coil that can get you every band that the KH1 supports with just the provided whip and counterpoise (plus the coil).? I tested it earlier this week and

FWIW, K6ARK came up with short wire antenna configuration for the KH1 for those times where you want or need a little bit more efficiency that what the supplied whip provides.? For those that are not

Thanks Don for the info on this adapter. I purchased one a while back from McMaster Carr but it cost more and is only ‘one way’-male 3/8-24 to M10. Chelegance makes excellent products,and my

I use the mini shock corded whip from Buddipole. 122" with the stinger and only 12” collapsed. Nice and compact I take it with me everywhere even when I am doing stationary mobile.

The DS1 has apparently been replaced by the CLV, which is now center loaded instead of base loaded.? The CLV is half the cost of the AX1 but requires quite a bit of user assembly.? It folds up very

Yes, definitely.? I? modeled my attempt at an AX1 with 10 feet of the counterpoise about one foot off the ground, and 3 feet of it angled upward to the base of the whip at 4 feet off the ground.? I

Back in December I ran a test of QRPGUYS DS1, similar to the AX1 and a QRPLABS U4B 27mW transmitter on WSPR. I ran the test for a complete 24 hour cycle. The antenna was mounted on a tripod about

I know when I deploy my AX1/KX2 with an elevated radial or three...it seems to work a lot better than laying the radials on the ground. When I can find something to drape them over. de KB9BVN Brian

Well, I think you understand more than you think, and certainly more about? antennas than the average ham. A few years ago I made a 5 element DK7ZB antenna for 6 meters.? The version I made was one

The stainless steel used in extendable whip antennas is typically type 301 or 304, both of which have a relative permeability of 1.05 or less ... which means they are essentially non-magnetic and

thanks Dave. In fact I rather don't know, what I am doing. I just did not want to get an antenna off the shelf and do something homebrew and the DK7ZB conzept looked easy. But hen on the first setup

Groups, I've sold my PALM RADIO straight key and paddle. Thanks everyone for your interest and patience 73 Jay W6CJ

It must be stainless steel because I have left it outside in the rain many times and there is no rust. Paul Sent: Wednesday, March 26, 2025 3:10 PM To: [email protected] Subject: Re: [qrparci] AX1 -