Version 0.9.0-1 of QRadioLink is now available as source packages.
Changelog:
* Added configurable time domain display
* Added UDP to ZeroMQ proxy (enables SVXLink audio as one of the FM carriers
in MMDVM-multi mode)
* FM is now one of the modes supported by MMDVM-multicarrier
SVXLink-related changes: you can now add a single FM repeater channel in the
multi-carrier transceiver mode.
You will need to set the configuration option *zmq_proxy_channel* to the
relevant FM channel number (should never be channel 1, so the value goes from
2 to 7).
To use the FM carrier with svxlink, start the application using the following
CLI parameters:
$ qradiolink --mmdvm --udp
Then configure svxlink to send audio via UDP to and from the ports configured in
qradiolink.
When combining MMDVM-SDR with this new functionality, you will need to not
start at all the MMDVM instance for the channel number configured here,
otherwise the new functionality will not work.
What this means is that now you can directly mix FM with DMR, YSF or M17 on
your multi-carrier base-station (at the moment only one channel). Note that
other applications can also provide audio via UDP as well, so feel free to
experiment with this functionality.
The documentation will soon be updated with this information.
In the future, we are looking at the possibility of implementing an MPT1327
analog trunking base station with svxlink as a network back-end. If you are
interested in making this happen and want to contribute, contact me via this
mailing list.
Adrian
