Re: First time install - 2 questions

#93

Thank you Ladislav

Works perfect!

Cheers Adam

Re: First time install - 2 questions

#92

Hi Adam,

The circle map should be fixed in a new QLog v0.33.1 release together with a critical issue in rig control.

Regards

Ladislav

pá 8. 3. 2024 v?22:35 odesílatel Adam VK4IM <vk4im0438@...> napsal:

Show quoted text

Thanks for your quick reply Ladislav

Yes, both the online map and regular map are correct an work as expected

I look forward to the next release

Cheers
Adam VK4IM

Release 0.33.1

#91

Let me inform you that a hotfix QLog release v0.33.1 is finished.

Changelog:

- Fixed Rig Controller critical issue ?
- Fixed Azimuthal Map issue

I apologize for the inconvenience

Changelog:

Re: Release 0.33

#90

Unfortunately, Critical Issue is present. The new release will be available ASAP.

I apologize for the inconvenience

Regards

Ladislav

pá 8. 3. 2024 v?15:44 odesílatel ok1mlg via <ok1mlg=[email protected]> napsal:

Show quoted text

Let me inform you that a new QLog release v0.33.0 is finished.

Changelog:
- [NEW] - Added Rig Interface TCI
- [NEW] - Callbook search can be temporarily paused
- Improved DXC Mode recognition
- Fixed Modal dialog blinks - Windows platform (issue #315)
- Fixed LoTW and eQSL download are only QSLs downloads - button label changed (issue #318)
- Fixed i18n: Country Names and Prop-modes are translated (issue #322)

Changelog:
WIKI Changelog:

Re: First time install - 2 questions

#89

Thanks for your quick reply Ladislav

Yes, both the online map and regular map are correct an work as expected

I look forward to the next release

Cheers
Adam VK4IM

Re: First time install - 2 questions

#88

Hi Adam,

please, see my response below.

Regards

Ladislav

pá 8. 3. 2024 v?11:32 odesílatel Adam VK4IM <vk4im0438@...> napsal:

Hi

I just installed QLog (MS WIndows) for the first time and have it working for both rig and rotor control using hamlib. Logs have been imported from LOG4OM and everything appears to be set up and working OK.

I? have a couple of questions perhaps someone can help me with:

1. Is there a way to center the circle map in rotator control on my own QTH. It seems to be centered on south America - I'm in Australia?

QLog should center the circle based on the current gridsquare in your station profile. But it seems that there is an issue under certain circumstances. I'll check it and prepare a fix. It seems that there is no issue when the rotator is shown on the online map.

2. Can rig control and rotor control be configured to automatically connect at program start up?

I don't remember why I didn't put it there. I'll try to think about it, but I can add it as a Rig setup option.

?

I know QLog is young but first impressions are very good. Congratulations!

Cheers
Adam VK4IM

Release 0.33

#87

Let me inform you that a new QLog release v0.33.0 is finished.

Changelog:
- [NEW] - Added Rig Interface TCI
- [NEW] - Callbook search can be temporarily paused
- Improved DXC Mode recognition
- Fixed Modal dialog blinks - Windows platform (issue #315)
- Fixed LoTW and eQSL download are only QSLs downloads - button label changed (issue #318)
- Fixed i18n: Country Names and Prop-modes are translated (issue #322)

Changelog:
WIKI Changelog:

First time install - 2 questions

#86

Hi

I just installed QLog (MS WIndows) for the first time and have it working for both rig and rotor control using hamlib. Logs have been imported from LOG4OM and everything appears to be set up and working OK.

I? have a couple of questions perhaps someone can help me with:

1. Is there a way to center the circle map in rotator control on my own QTH. It seems to be centered on south America - I'm in Australia?
2. Can rig control and rotor control be configured to automatically connect at program start up?

I know QLog is young but first impressions are very good. Congratulations!

Cheers
Adam VK4IM

Re: Damn Awesome Guys!

Andy Holmes, K5PO

#85

Yes, I went through a process of assessing all the major loggers on the market and felt this one was the best mix of modern design—which is very scare in this market—and features.?

Looking forward to the future of the tool! 73
--
Andy Holmes | K5PO
Bella Vista, AR USA

Re: Ad hoc contest feature as suggestion

#84

Robert,

I can say from my own experience that I used the comment field as an exchange, but unfortunately, it's not that convenient, especially when you need auto-increment.?

I understand Dave's request, but creating a good contest log is really a long-term development. And most importantly, the change will significantly affect the design of the GUI.

Regards

Ladislav

út 20. 2. 2024 v?3:33 odesílatel Robert Bower <frrobert@...> napsal:

Show quoted text

Dave,

Could you use the comment field to store the STX information?? Then after you export the log you could just edit the lines with the STX and add the fields to those log entries.

On Mon, Feb 19, 2024 at 12:02:50PM -0800, Dave, G8FXM wrote:
>Hi Ladislav,
>Ok understood, it could open up a can of worms. Happy to keep QLog just the way it is and continue to use pen and paper to keep track of my STX when I work a station who is in a contest :-)
>
>--
>73's de Dave, G8FXM
>
>
>
>
>

--
Thanks,

Robert

W9WRB
WRPH745

Re: Ad hoc contest feature as suggestion

#83

Dave,

Could you use the comment field to store the STX information?  Then after you export the log you could just edit the lines with the STX and add the fields to those log entries.

Show quoted text

On Mon, Feb 19, 2024 at 12:02:50PM -0800, Dave, G8FXM wrote:
Hi Ladislav,
Ok understood, it could open up a can of worms. Happy to keep QLog just the way it is and continue to use pen and paper to keep track of my STX when I work a station who is in a contest :-)

--
73's de Dave, G8FXM

-- 
Thanks,

Robert

W9WRB
WRPH745

signature.asc

Re: Ad hoc contest feature as suggestion

#82

Hi Ladislav,
Ok understood, it could open up a can of worms. Happy to keep QLog just the way it is and continue to use pen and paper to keep track of my STX when I work a station who is in a contest :-)

--
73's de Dave, G8FXM

Re: Ad hoc contest feature as suggestion

#81

Hi Dave,

It's an area I get asked about a lot. I also like to participate in contests, so I would welcome that as well. However, there are several mental barriers preventing its implementation in QLog:

QLog was initially defined as a non-contest log.
While adding a couple of fields for exchange isn't problematic, I fear it won't stop there. We'll likely need to export to several contest formats (EDI, Cabrillo, etc.).
If we support adding fields for Exchange and Export QSO, why not consider adding Voice Macros? I've already received such a request.
If Voice Macros are included, we can't overlook calculating points together with multipliers. Every contest is different therefore it will be needed to create a pseudo-language to define contest rules.
Exchange can contain more than just a serial number; it also includes a special area, ITU/CQZ zones, etc. We'll need to define Value-Lists for these "special" exchanges and, most importantly, keep them up-to-date.
There are special contests with stages and various restrictions (10-minutes rule etc).

These are just some of the considerations for implementation. If we start with the exchange fields then QLog can become N1MM.

We can open the data discussion, whether I am wrong and if my ideas are too complicated.

Regards

Ladislav

ne 18. 2. 2024 v?16:23 odesílatel Dave, G8FXM <webmaster@...> napsal:

Show quoted text

I know that QLog isn't a contest logger, and I'm happy with that. However I find myself working stations in a contest, while not participating myself and having to give away serial numbers. A useful feature would be like the one provided by CQRlog which when in contest mode allocates STX and records contest name until you turn the feature off. Full description here:?

Just a suggestion.
--
73'd de Dave, G8FXM

Re: QRZ

#80

开云体育

Ladislav,

Thanks for the answer and thanks again for some great software.

---

Thanks,

Robert Bower
W9RWB
WRPH745

Show quoted text

On 2024-02-17 07:17, ok1mlg wrote:

Hello Robert,

?

Many thanks. I do my best to make QLog useful.

?

I would answer your question. It is necessary to distinguish which services are designed as QSL-exchange services and which are Online Logs. And that is the case of the mentioned services. The QRZ service isn't primarily a QSL service. That means confirmation from this service isn't officially recognized as a QSL. On the other hand, LoTW (eQSL) and Paper QSL are valid QSL methods. So, if you see LoWT, eQSL and Paper in the QSL tab of the QSO Detail tab, then it should indeed be there. If you want to see if you've uploaded a particular QSO to QRZ, then I recommend adding this column to the QSO listing window.

?

Regards

Ladislav

?

pá 16. 2. 2024 v?17:09 odesílatel Robert Bower <frrobert@...> napsal:

Good morning,

I just installed QLOG 0.32 via the Ubuntu PPA.? I got everything configured and really enjoyed using it last night.?

I used the software to upload my logs to both LOTW and QRZ.? If I then click on a log entry that has been uploaded followed by clicking on the QSL tab it shows the log has been uploaded to LOTW but there is no place for QRZ.? The tab lists paper, LOTW, and eQSL.? Is that by design or am I missing something?

Thanks

--
Thanks,

Robert

W9WRB
WRPH745

Re: How to remove window tabs?

#79

Thank You! So Much!

Yes, I should have read the wikis first!

73s

Ad hoc contest feature as suggestion

#78

I know that QLog isn't a contest logger, and I'm happy with that. However I find myself working stations in a contest, while not participating myself and having to give away serial numbers. A useful feature would be like the one provided by CQRlog which when in contest mode allocates STX and records contest name until you turn the feature off. Full description here:?

Just a suggestion.
--
73'd de Dave, G8FXM

Re: How to remove window tabs?

#77

I recommend defining your own layout and saving your layout before any further manipulation using "Save Arrangement" .

For more details, please, read QLog' wiki -

Otherwise, it is very easy to move tabs. Drag the tab and move it to where it is needed. See attached screenshot.

Regards

Ladislav

ne 18. 2. 2024 v?10:16 odesílatel VU3HZW <vu3hzw@...> napsal:

Show quoted text

I somehow managed to make the right default windows - tabbed. All I need is the Time & Online Map stacked in one single column

How do I undo the changes? Tried couple of drags and drops without any success. Any way to reset the layout?

73s

VU3HZW