Re: Error when startup Qlog v0.40.1
OK...windows...
1) start command line
cmd 2) jump to QLog system dir cd c:\Program Files\QLog 3) type follow command set QT_LOGGING_RULES=qlog.core.migration.*=true 4) start qlog with following parameters qlog.exe > c:\Users\<YOUR_HOME>\debug.txt 2>&1
Please, replace <YOUR_HOME> the folder, where you have your Home dir.
It will generate a debug.txt file in your home directory. Please, send me the file.
Unfortunately, I did not find any issue when I tested this version under Linux and Windows and again I retested this version under Windows from QLog v0.36. So it seems that your database is "unexpectedly" different.
so 30. 11. 2024 v?19:21 odesílatel Bent Andersen via <eskolin= [email protected]> napsal:
I use this one for windows: and install?it as standard !
Ben?
you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?
so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: I cannot?start Qlog.... and I did not add the 8m Band to the?database
if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !
Ben
Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog
so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: sorry but last working ver is for me 0.40 and there is no 8m band in it....
how to fix this problem ??? and I havent got a copy of 0.40 :-(
Ben
If you already have an 8m band in the databa, then remove it. The release adds the record for it.
so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: just updated to v0.40.1 and get this screen:
?
|
Re: Error when startup Qlog v0.40.1
I use this one for windows: and install?it as standard !
Ben?
you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?
so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: I cannot?start Qlog.... and I did not add the 8m Band to the?database
if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !
Ben
Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog
so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: sorry but last working ver is for me 0.40 and there is no 8m band in it....
how to fix this problem ??? and I havent got a copy of 0.40 :-(
Ben
If you already have an 8m band in the databa, then remove it. The release adds the record for it.
so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: just updated to v0.40.1 and get this screen:
?
|
Re: Error when startup Qlog v0.40.1
you have to specify the path to the qlog. Which package system do you use? Deb, Flatpak, RPM?
so 30. 11. 2024 v?18:58 odesílatel Bent Andersen via <eskolin= [email protected]> napsal:
I cannot?start Qlog.... and I did not add the 8m Band to the?database
if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !
Ben
Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog
so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: sorry but last working ver is for me 0.40 and there is no 8m band in it....
how to fix this problem ??? and I havent got a copy of 0.40 :-(
Ben
If you already have an 8m band in the databa, then remove it. The release adds the record for it.
so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: just updated to v0.40.1 and get this screen:
?
|
Re: Error when startup Qlog v0.40.1
I cannot?start Qlog.... and I did not add the 8m Band to the?database
if I try to run this cmd: QT_LOGGING_RULES=qlog.core.migration.*=true qlog from a cmd-line I get the error that the file is not found !
Ben
Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog
so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: sorry but last working ver is for me 0.40 and there is no 8m band in it....
how to fix this problem ??? and I havent got a copy of 0.40 :-(
Ben
If you already have an 8m band in the databa, then remove it. The release adds the record for it.
so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: just updated to v0.40.1 and get this screen:
?
|
Re: Error when startup Qlog v0.40.1
Did you manually add the 8m band to the database? If not, please, send me the debug output for Migration - execute QLog manually from a command line :? QT_LOGGING_RULES=qlog.core.migration.*=true qlog so 30. 11. 2024 v?17:46 odesílatel Bent Andersen via <eskolin= [email protected]> napsal:
sorry but last working ver is for me 0.40 and there is no 8m band in it....
how to fix this problem ??? and I havent got a copy of 0.40 :-(
Ben
If you already have an 8m band in the databa, then remove it. The release adds the record for it.
so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: just updated to v0.40.1 and get this screen:
?
|
Re: Error when startup Qlog v0.40.1
sorry but last working ver is for me 0.40 and there is no 8m band in it....
how to fix this problem ??? and I havent got a copy of 0.40 :-(
Ben
If you already have an 8m band in the databa, then remove it. The release adds the record for it.
so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: just updated to v0.40.1 and get this screen:
?
|
Re: Error when startup Qlog v0.40.1
If you already have an 8m band in the databa, then remove it. The release adds the record for it.
so 30. 11. 2024 v?17:31 odesílatel Bent Andersen via <eskolin= [email protected]> napsal:
just updated to v0.40.1 and get this screen:
?
|
Error when startup Qlog v0.40.1
just updated to v0.40.1 and get this screen:
?
|
Re: Problems on mac version
Thanks Michael for the prompt reply.
1 - yes, as said the windows are "popped out" for better ergonomics of the monitors
2 - ok with "always" everything ok (sorry I hadn't thought of that)
73 Roberto IU2NUB
|
Re: Problems on mac version
1. Do you have the windows "popped out" from the main app? 2. It looks like you may have HamQTH setup for callsign lookups.? I typically would enter my keychain password and just select 'Always' or it will keep asking for permission to access the password.
On Sat, Nov 30, 2024 at 2:30?AM Roberto IU2NUB via <iu2nub.rb= [email protected]> wrote: Good morning,
I use qlog with mac m1 sonoma
I have 2 problems
the first one I have always kept open Dx cluster, online map, clock and radio in independent windows, when the focus switches to another application eg. SmartSDR the windows "disappear" from the monitor.
the second one that appeared only with version 0.40.1 asks me to access the keychain every time I open the preferences, see image.
Thanks
Roberto IU2NUB
?
|
Good morning,
I use qlog with mac m1 sonoma
I have 2 problems
the first one I have always kept open Dx cluster, online map, clock and radio in independent windows, when the focus switches to another application eg. SmartSDR the windows "disappear" from the monitor.
the second one that appeared only with version 0.40.1 asks me to access the keychain every time I open the preferences, see image.
Thanks
Roberto IU2NUB
?
|
Good afternoon.
I have a few questions about controlling the radio Yaesu FTdx10
1. When I control via omnirig1 - CW mode is selected as I like, CW-L, but does not remember the selected filters for the bands. It uses the ones that were on the current band. For example on 40m I have a 12db attenuator on, and on WARC AMP1 a preamplifier. But when I switch bands in QLOG or click on a station in a cluster, my settings on the transceiver are ignored. If I switch the band on the transceiver - everything is fine, the desired settings are enabled.
2. hamlib in QLOG does not work directly at all, it thinks for a long time, then it seems to turn green, but it writes 160m band and AM mode, the radio is not controlled from the program.
When I run hamlib from the command line (“C:\Program Files\hamlib-w64-4.5.5.5\bin\rigctld.exe” -m 1040 -r COM6 -s 38400 -t 4532), and then in the program select hamlib NET rigctl - it works fine. My range settings are all there when switching in the program. BUT! CW mode always becomes CW-R. I can't find anywhere in Qlog how to set the default CW or CW-R. In other programs there is an option for the desired CW mode, but in Qlog I didn't find it.
Could you please tell me how to solve this? Either configure omnirig to remember my settings for the bands, or configure hamlib to default to CW-L mode
Translated with DeepL.com (free version)
|
I saw your wiki the other day and read over it, it looks really well laid out.? The only issue I notice is in the activities editor I didn't have the POTA field available to be chosen in the beginning.? Then I figured it out, but it wasn't super clear so you may want to explain the need to?go and remove it from the details list first.? But other than that It looks great.? The combination of that and the option you add to hide the details will make it much better when portable with my MacBook Air or other devices with smaller screens.
|
https://github.com/kyleboyle/QLog/wiki/POTA-Activations
|
Hi Michael, thanks for feedback. I would love if you could read this proposed wiki entry for guiding users on how to apply QLog to their POTA activations;? your suggestions on improvements would be greatly appreciated.
Cheers
Kyle
|
I built a Mac version on my GitHub earlier.? Thanks for the update.
Let me inform you that a new QLog release v0.40.1 is finished.
Changelog:
- Fixed Bands - Added missing 8m band (issue #515)
- Fixed CW Console - EXCSTR does not work properly (issue #517)
- Fixed Activity Manager - Missing Propagation Mode None (issue #519)
- Fixed QSO Filter - filter fields with random order (PR #525 @aa5sh)
- Fixed TCI error when you change Rig (issue #526)
- Fixed NewContact - satellite mode too wide (issue #527)
Changelog:
|
Let me inform you that a new QLog release v0.40.1 is finished.
Changelog:
- Fixed Bands - Added missing 8m band (issue #515)
- Fixed CW Console - EXCSTR does not work properly (issue #517)
- Fixed Activity Manager - Missing Propagation Mode None (issue #519)
- Fixed QSO Filter - filter fields with random order (PR #525 @aa5sh)
- Fixed TCI error when you change Rig (issue #526)
- Fixed NewContact - satellite mode too wide (issue #527)
Changelog:
|
Hi!
Very usefull thing! Especcialy for everything award station, like
IR0RCAG. One look - and i know working with it or not
On 24.11.2024 11:31, ok1mlg via
groups.io wrote:
toggle quoted message
Show quoted text
Let me inform you that a new QLog release v0.40.0
is finished.
The biggest change in this release is the new Activity Manager,
which replaced the Layout Manager. The Activity Manager is now
in the bottom-left corner.
Basic contest support has also been added. Please read more
about contest support on the .
Changelog:
- [NEW] - Activity Manager - merged Layout Manager and profiles
(issue #408)
- [NEW] - Activity Manager - Added new dynamic fields - Contest
fields, RX/TX Power
- [NEW] - Added light support for contests (issue #345)
- [NEW] - Added CW macros EXCHSTR, EXCHNR, EXCHNRN
- [NEW] - Export Filter - Added user filter combo (original idea
PR #476 @aa5sh)
- [NEW] - New Contact - ?Added expand/collapse button to QSO
field tab widget (PR #495 @kyleboyle)
- [NEW] - Alert - Added CQZ and ITUZ filters
- [NEW] - KSTChat - Added a new 40MHz room (PR #496 @kyleboyle)
- [NEW] - Station Profile contains Operator Callsign (issue #441
@kyleboyle)
- [NEW] - Station Profile contains County (issue #493
@kyleboyle)
- [NEW] - Statistics - Adds time of day and better qso mapping
(PR #501 @kyleboyle)
- [NEW] - Bandmap - Tooltip shows a spotter callsign (PR #507
@Skittlebrau)
- [CHANGED] - New Contact - Renamed DXCC Tab to DX Stats
contains DXCC and Station Statistics (issue #477)
- [CHANGED] - QSL Import dialog - Detail text is selectable by
mouse and keyboard
- [CHANGED] - Removed Main Menu Layout; Activity Manager is in
the bottom-left corner
- [CHANGED] - Removed Keep Options from the Equipment Menu - use
Activity Manager for it
- Fixed issue when CW is always selected after Settings exiting
or connecting the Rig
- Updated Timezone definition file - version 2024b
Changelog:
|
Re: sending last qso out on Cluster ???
HI Michael
I now deleted?my account at OZ5bbs and created a new one....now it looks as the spot is working :-)
73" OZ1CT Ben
Den tirs. 26. nov. 2024 kl. 21.22 skrev Michael Morgan via <cmorgan13= [email protected]>:
Not at the cluster but in QLog by right clicking in the DX Cluster window:
Hi Michael?
Sorry but I can't remember that I ever have made a "filter"....but I wil try to go to the cluster oz5bbs and see my setup.
Ben
Send from my mobile office.
What spot filters do you have in place?? If you see it in the console but not it the grid it sounds like you are filtering it out.
Michael, AA5SH
But why can I see the spot in the "consol-window" and not in the "spot-window" ????
Do you mean that I have a filter on the cluster ????
Ben
Send from my mobile office.
What about some filter that can suppress this?
út 26. 11. 2024 v?15:00 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: I try to send the comd. and hit enter...the spot do not show up in "Spots"
But if I go in to "Console" I can se?my?spot ???
Ben
I tested this case, and I can see my own spot. Did you send the spot by pressing the Enter ? "Spot Last QSO" only prepares the message for DX Cluster. You can then add remark and then the spot has to be sent by pressing Enter.
so 23. 11. 2024 v?15:29 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: after end qso I hit the "Spot last qso" and it fill out whit the last qso...but I cant see that it is spotted on the cluster...somthing wrong here ???
?
|
Re: sending last qso out on Cluster ???
Not at the cluster but in QLog by right clicking in the DX Cluster window:
Hi Michael?
Sorry but I can't remember that I ever have made a "filter"....but I wil try to go to the cluster oz5bbs and see my setup.
Ben
Send from my mobile office.
What spot filters do you have in place?? If you see it in the console but not it the grid it sounds like you are filtering it out.
Michael, AA5SH
But why can I see the spot in the "consol-window" and not in the "spot-window" ????
Do you mean that I have a filter on the cluster ????
Ben
Send from my mobile office.
What about some filter that can suppress this?
út 26. 11. 2024 v?15:00 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: I try to send the comd. and hit enter...the spot do not show up in "Spots"
But if I go in to "Console" I can se?my?spot ???
Ben
I tested this case, and I can see my own spot. Did you send the spot by pressing the Enter ? "Spot Last QSO" only prepares the message for DX Cluster. You can then add remark and then the spot has to be sent by pressing Enter.
so 23. 11. 2024 v?15:29 odesílatel Bent Andersen via <eskolin= [email protected]> napsal: after end qso I hit the "Spot last qso" and it fill out whit the last qso...but I cant see that it is spotted on the cluster...somthing wrong here ???
?
|
Bent Andersen