开云体育

I turned off the routing.? I will also install your new version. "hree different devices logged into openquad.net"? -? I try to always unlink from a reflector / talkgroup when I end a QSO to avoid

This is curious. That error message means it made 326 attempts to read the "magic start byte" of a DV3000 packet. 326 is the maximum size of any packet that the DV3000 might send (all the other packet

QDV hung up, but there were no Beeps ythis time. ~/bin/qdv Initialized AMBE3000R version V120.E100.XXXX.C106.G514.R009.B0 #Gateways: /home/calvin/etc/gwys.txt=2135 read 62 indicies from

Will do right now

Sorry, not enough to go on. Were there any interesting messages in the terminal you start qdv from? Next time, please open a new window and type "killall qdv" and then send me what's in the terminal

There beeping started at about 10 minutes of no TX from me.? There was activity that I was listening to on XRF757 A.

I was listening to the start of the Qnet Array pre-net just now.? I had a short QSO with someone and then was just listening for the net to start when I started hearing short beeps coming for the

Thanks Cal, I pushed up a new version (200510) with a shorter window. Users can make it bigger by dragging a corner. Hopefully this will fit on your smaller screen.

Looks like it worked.? I ran it on an Acer notebook (9 inch screen) running Ubuntu MATE 18.04.? The QDV screen is a little too tall for the 9 inch screen as I can only as I cannot see below the Echo

Do in this order (from your build directory): make uninstall make clean git pull sudo apt install libsqlite3-dev make make install and then a "sudo make installdash" if you want to use the web-based

What files related to the prior installation are no longer needed and should be deleted?

I've uploaded a new release (200508) today with many changes: * Since the very beginning IRC clients have maintained both an "inner" and "outer" Follow-Me cache for routing. The inner cache was

I too have been waiting for this Codec2 thing to put something in my hands for VHF UHF. It seems their focus has been mostly for HF. I was hoping by now to at least see some code I could run on a

Steve, I appreciate what you are trying to do, but you could have provided a link to your blog ( https://kb9mwr.blogspot.com/ ). There is a lot of good stuff there. For me, I'm not that interested

It would likely just be better to create a multi-channel software vocoder for D-Star, this chip business is silly. A lot of folks use the MD380 emulator (which is the handy work of Travis, KK4VCZ's

Sorry for taking so long to approve your message! I was out for most of the end of Dec. Your message look normal. When you click the settings button, it automatically re-initializes the ThumbDV, so

First off, thank you very much for all your hard work. I recently install qdv on a clean Buster image on a Raspberry Pi 4.? I followed your instructions as listed in git to the letter (hence the

SOLVED? It seems the humming was due to my Logitech H390 USB headset.? I tried my BT/wireless H800 headset.? Could not get the H800 to be recognized by the Audio Device Settings when I was using

I followed your instructions for the RPi install. There are no differences between the default setting and the Logitech setting. The "sound card selection is working" is related to a different

Hi Cal, If you installed pulseaudio on your Pi and selected the default ALSA device as instructed in the README.md file, you should see both a "default" device as well as your specific headset in the