#7440

开云体育

For those of you that might be interested, I was recently speaking with David White from Slater’s and he mentioned they have a new wheel type they are doing for there Lynton & Barnstaple Manning Wardle kit, the wheels themselves screw onto the axles.The subject came up because I was asking David what they had available to better suit the backwoods Miniature NGG-16 Garratt kit, from speaking with a number of people who have done this kit the wheels and crank arrangement leaves a lot to be desired.

Below is a copy of David’s email to me in regards to these new wheels,

?

“The total length of our Lynton & Barnstable axle is 29.58mm the diameter of the axle between the wheels is 3.175mm and the extensions are 2.48mm the square on the end is 1.69mm A/F and the width of the squares are 1mm. We have two wheels of 2'9" that screw onto? this axle, one 10 spoke and one 8 spoke. The crank for our L & B loco kit is machined from steel, we could do an alternative crank in fact i do not know why Backwood’s? did not ask us to do a proper set of wheels. Probably a set of wheels properly engineered with the correct machined cranks at about ?13.00 an axle is too expensive. Once you have studied these dimensions if they are suitable we could have a look at doing a proper crank to fit.

kind regards

David White”

?

Brian
Rawbelle County Workshops
Qld. Aust.

#7441

开云体育

Surprised they’re doing a Manning Wardle before they’ve released Lyn, or did you mean Baldwin?

David H

Show quoted text

On 31 Jan 2020, at 20:26, Brian <rallim56@...> wrote:

?

For those of you that might be interested, I was recently speaking with David White from Slater’s and he mentioned they have a new wheel type they are doing for there Lynton & Barnstaple Manning Wardle kit, the wheels themselves screw onto the axles.The subject came up because I was asking David what they had available to better suit the backwoods Miniature NGG-16 Garratt kit, from speaking with a number of people who have done this kit the wheels and crank arrangement leaves a lot to be desired.

Below is a copy of David’s email to me in regards to these new wheels,

?

“The total length of our Lynton & Barnstable axle is 29.58mm the diameter of the axle between the wheels is 3.175mm and the extensions are 2.48mm the square on the end is 1.69mm A/F and the width of the squares are 1mm. We have two wheels of 2'9" that screw onto? this axle, one 10 spoke and one 8 spoke. The crank for our L & B loco kit is machined from steel, we could do an alternative crank in fact i do not know why Backwood’s? did not ask us to do a proper set of wheels. Probably a set of wheels properly engineered with the correct machined cranks at about ?13.00 an axle is too expensive. Once you have studied these dimensions if they are suitable we could have a look at doing a proper crank to fit.

kind regards

David White”

?

?

Brian
Rawbelle County Workshops
Qld. Aust.

#7442

开云体育

They might be for Lyn, hence the reason they’re doing a 10 spoke version as well as a 8 spoke version

.

?

Brian
Rawbelle County Workshops
Qld. Aust.

?

Show quoted text

From: David Hughes

Sent: Saturday, February 01, 2020 6:44 AM

To: [email protected]

Subject: Re: [o14] Slater's Manning Wardle Wheels

?

Surprised they’re doing a Manning Wardle before they’ve released Lyn, or did you mean Baldwin?

David H

On 31 Jan 2020, at 20:26, Brian <rallim56@...> wrote:

?

For those of you that might be interested, I was recently speaking with David White from Slater’s and he mentioned they have a new wheel type they are doing for there Lynton & Barnstaple Manning Wardle kit, the wheels themselves screw onto the axles.The subject came up because I was asking David what they had available to better suit the backwoods Miniature NGG-16 Garratt kit, from speaking with a number of people who have done this kit the wheels and crank arrangement leaves a lot to be desired.

Below is a copy of David’s email to me in regards to these new wheels,

?

“The total length of our Lynton & Barnstable axle is 29.58mm the diameter of the axle between the wheels is 3.175mm and the extensions are 2.48mm the square on the end is 1.69mm A/F and the width of the squares are 1mm. We have two wheels of 2'9" that screw onto? this axle, one 10 spoke and one 8 spoke. The crank for our L & B loco kit is machined from steel, we could do an alternative crank in fact i do not know why Backwood’s? did not ask us to do a proper set of wheels. Probably a set of wheels properly engineered with the correct machined cranks at about ?13.00 an axle is too expensive. Once you have studied these dimensions if they are suitable we could have a look at doing a proper crank to fit.

kind regards

David White”

?

?

Brian
Rawbelle County Workshops
Qld. Aust.

Virus-free.