开云体育

Wrightlines (see keykits under links) also do wagon wheels although I suspect these are the Alan Gibson ones. John C

Frank See reply to Mark whic should hit group about now for answers to most of your queries. When I asked A.G. about selling the F.R. wheel he replied that if anyone enquired he referred them to me,

Mark, Alan Gibson is probably the only other reliable supplier of wheels. He already makes at least two diameters of curly spoke, 10.5mm and 12mm diameter and also various 4mm scale disc and spoke

Mark, What are you thinking of making or having made that Gibson in particular doesn't do? He makes curly spokes in 3 sizes. 9, 10.5 and 12mm, and some of his 00 wheels will also do for narrow

G'day all, What is commonly used as 14mm gauge wheelsets for rollingstock? I believe Roy Link won't sell his wheels separately, is Gibson the only other supplier? Is there any interest in having a

Thanks John and Frank, I guess a few experiments are in order. Time to learn to handlay points! Then again, if we all send our inferior axles back to Romford for replacement with correct axles maybe

Mark, I've already seen the post from John C, but my findings in terms of running were slightly different. On 14mm track, carefully checked by both gauges and then when I perceived a problem by

Hi Mark Over the last few years I have read many articles about obtaining good running and all seem to imply that following consistent standards is vital, especially through pointwork. I dont know

G'day All, I have heard it said that Romford 14mm gauge axles are actually 14.2mm gauge for Sn3. According to John Clutterbug's recently posted standards info (in the files), there is an extra

I have just uploaded a document and diagram for the O14 track standards into the files section. Hopefully the diagram should be displayed within the document. Regards John

G'day Grant, There'll be an O-14 focus group at the convention? Great, count me in. My experience so far has been a few Roy Link skips, 3' of track on PCB sleepers, a Berg's Burrinjuck wagon and a

Hi, I have just joined the Group. For those who don't know me I am heavily involved with the exhibition circuit in Victoria (Australia) as well as many of the Australian Narrow Gauge Conventions. I

Hi I thought I better introduce myself as my joining the other day prompted mark to publicise the group. I have modelled in 14mm for over 10 years and am 1/4 way through making a large loft layout

Hi Joined the group last night, when I tried to introduce myself Yahoo told me the group didn't exist and returned my message! So here goes again. Having seen the message announcing the formation of

Hi, I joined the list today. I recently purchased the Roy Link Handbook and some skips to see if I like the water. I have been in On16.5 for many years in 1/43 scale. My primary interest is in

Mark, Yes is the simple answer, but nominally the one made for the Duke of Sutherland on page 16. Though the lining looks to be typical M.W. it is also similar to the early lining used on the

G'day Frank, Are you going to do the frames with the ornate cut outs as on cn 487 (page 17-Locos built by MW 1)? Also, are you going to build a new saddle tank, to be semicircular in cross section

I've got one to do, I intend to make it 'proper' outside framed, and use Alan Gibson's bearings. I will use a gearbox, probably a highlevel type, and this should allow me to lift the motor into the

hello all I have joined the list today and will introduce myself.I model 7mm based on the Lynton & Barnstaple and am very interested in 14mm as I feel that the difference in gauge is noticeable.At

Hi List; I just saw the posting about this group being formed on the 7mmNGA list. Since my interest in 7mm narrow gauge is the two-foot lines in particular, here I am. I've added to the database on