开云体育

Heres my answers: 1) Are you actually working to 14mm gauge? Yes (2) if so are you using the RCL standard, if not what variation are you using? Using the "original" RCL standards from NG&I issue

No, currently building (slowly) in On30. But my prototype is 2' gauge, and I am still uncommitted to 1/4" and 16.5mm gauge. I shall be investigating the feasibility of converting mechs to 14mm gauge,

Frank, All, Question time sounds like a great idea. We have 50 members, and I know for sure that several don't model in O-14. It would be nice to know who does. The group poll feature won't work for

Now that John has raised the issue and Roy has kindly added a PDF file of 14mm track and wheel standards, how many of us are working to these, and if not what variations are in use? I ask because we

Amongst all these unmade kits, can anyone help me to find a 7mm DJB BR Class 4 Tank kit to purchase please? I have a Gibson Lynton & Barnstaple "LEW" 7mm NG unmade kit to exchange or for sale.

Roy/All Another apology as I failed to notice that Roy has kindly published the standards PDF in the files section. I have therefore removed my original files as these are far better than

I meant Guy Williams, but it equally applies to both. I'll wait and see if any others want some before getting any made. I assume as yours is still in the box you're not quite ready for them yet.

Re attic/loft -- if you had put insulation without a vapor barrier that did not contact the underside of the roof structure you would have upped the R value. It would have been really good if you used

<jclutterbuck2001@y...> wrote: about I used phosphor bronze for just that reason (but forgot to mention it in my Narrow Lines comments - d'oh!) On the contrary, I think you are absolutely correct.

Roy Thanks for the explanation of the O14 standards. I am the 'guilty' person responsible for publishing your standards in the files section. I have been following these standards for many years

14mm Gauge Standards I note that a set of standards, copied from NG&I REVIEW issue 14 are published in the 'Files' section for this group. These were tentative, and a revised set of standards,

Adrian/Frank My K1 kit was for 14mm, and therefore I assume I have the correct brass extensions. Note these are used directly in the bearings (e.g. brass in brass) which was one of the first things

Adrian, Will your wife notice that the built in wardrobes look remarkably like slate wagons stacked on top of each other? Frank (who's D I Y list is so long its on computer!)

<jclutterbuck2001@y...> wrote: adjusted John, That should not have happened as the McParlins have axle extensions of two lengths, one for 16.5mm gauge axles and another for 14mm gauge. Did you buy

John, I think you have said that the K1 is Romford wheels. Now assuming that the frames aren't already pushed out wider than they should be to allow for 16.5 gauge, there are some extensions made to

Further to the recent issues regarding 14mm axles I am finding that some kits do not allow the distance between the frames to be adjusted to match the gauge and maintain the correct relationship

Adrian, Not yet a 7mmNGA member because I'm a poor uni student and can't afford to be! Being in Australia without a credit card makes it hard too! I plan on joining up next year. Cheers, Mark

member? If it has relevance to 7mm scale NG modelling then it will be reviewed, regardless of source! Anyway, (Association committee hat on) why aren't you a member? :-) Adrian (TLO)

Very impressive piece of work. Bill Uffelman Frank Sharp <Frank.J.Sharp@...> wrote: How's that for a pun? I've put a photo of my double Fairlie in the photo section. This is taken before I

How's that for a pun? I've put a photo of my double Fairlie in the photo section. This is taken before I turned down the flanges. I don't really understand this adding photos business, so if you ask