David,
That looks like a noble start!
I have been using Fast Tracks templates in Sn3 for constructing my O14
turnouts and track.
Craig
toggle quoted message
Show quoted text
I just wanted to thank Marc, Frank, Dave and John for your advice on
building points in 021mm gauge. I took something from all the suggestions,
which were all helpful.
Point building is not my forte but it's necessary in 021 and 014 for that
matter. This first one gave me practice and experience as well as meaning
I
have a short test track where I can try out the centre couplings. The rail
is recycled from GEM TT flexitrack I bought around 1977, I think it's code
95! So quite heavy but fine for this application and try buying rail by
post at present.
A photo attached. The chassis is from Mark Clark.
Thanks again guys,
David
On Wed, 15 Apr 2020 at 09:16, John C via groups.io <jclutterbuck2001=
[email protected]> wrote:
Hi David,
1mm is what the scale seven group recommend for standard gauge track.
You
may want to review your dimensions against their standards here:
with the appropriate
deduction of gauge difference.
John
