Re: kargarin 100/8 rail (roller gauges)
|
Kevin, ? As Roy Link's standard was based on narrowed EM gauge I bought Carrs (C&L) EM roller gauges. These are very similar to John's description except that the spacing is done by a piece of tubing on the bolt. Simply shorten the tube. ? Frank ?
toggle quoted message
Show quoted text
From: O14@... [mailto:O14@...]
Sent: 30 January 2015 11:14
To: O14@...
Subject: [O14] Re: kargarin 100/8 rail (roller gauges)? ? Hi Kevin, A simple, crude but often effective method is to use a long bolt, 4 nuts, 4 large washers and smaller washers to pack out to the rail width. If you do one end up tight then adjust the other using a piece of track to a known exact gauge as a reference. I made a few like this for my S7 with gauge widening for the curves.
|
