Ok thank you for your input. I am copying plenty of traffic. Like you , I am not familiar with software based packet my PK 232 is currently being repaired at Time Wave?and once I get that back, I will be trying with my TNC. I will also try to connect to your node later on today.?
On Tuesday, January 14, 2025, 11:59 AM, N1UGK via groups.io <Bertierj@...> wrote:
Hi Tom,
I¡¯m next door to you, over in New Jersey (FN20). ?I do not have experience with software based packet, as I am running a hardware TNC. ?I¡¯m parked on 14.105 LSB. ?These are the nodes I¡¯ve heard since this morning (below).
I would suggest looking into a similar feature on your end where you can list who was heard and when. ?If you¡¯re decoding a few nodes, then you¡¯ve solved 1/2 of the problem. ?If you¡¯re decoding nothing then it could be baud rate (should be 300), tones and spacing is not set for HF (different tones on HF than VHF), or audio level, or QRM. ?What helps for me is a narrow width on the receive, not a full/wide 2400 hz, but 1200 or 800hz. ?This reduces interference from adjacent activity.
My node is N1UGK-1, I have mine set to beacon every 10 minutes or so.
KB9PVH-5/H ? 01/14/25 ?11:11:27
W1CDN-15/H ? 01/14/25 ?11:18:32
VA2PGN-4/H ? 01/14/25 ?11:23:33
VA3PIX-7/H ? 01/14/25 ?11:28:38
KB8UVN/H ? ? 01/14/25 ?11:30:53
VE3QBZ-1/H ? 01/14/25 ?11:35:13
VE3QBZ-15/H ?01/14/25 ?11:35:17
KB9PVH-1/H ? 01/14/25 ?11:39:10
W9LCF-7/H ? ?01/14/25 ?11:40:03
W9LCF-3/H ? ?01/14/25 ?11:42:25
PVHBBS/H ? ? 01/14/25 ?11:43:11
VE3QBZ/H ? ? 01/14/25 ?11:43:26
KB9PVH-7/H ? 01/14/25 ?11:43:29
VE3QBZ-7/H ? 01/14/25 ?11:46:29
KD2YCK-7/H ? 01/14/25 ?11:46:53
KC9GUY/H ? ? 01/14/25 ?11:47:48
KC9GUY-1/H ? 01/14/25 ?11:47:49
KD2YCK-1/H ? 01/14/25 ?11:49:47
VA2PGN/H ? ? 01/14/25 ?11:51:19
73,
On Jan 13, 2025, at 2:09?PM, Thomas Testa via groups.io <TMTLU3@...> wrote:
N2UFM
On Monday, January 13, 2025, 1:59 PM, Carl- WH6ANH via groups.io <carlwh6anh@...> wrote:
What¡¯s your callsign
Sent from Carl WH6ANH iPhone
On Jan 13, 2025, at 11:55, Thomas Testa via groups.io <TMTLU3@...> wrote:
?
Hell name here is Tom. I am new to the group and HF Packet. I recently installed UZ7HO'S sound modem and easy term clients. I have been trying to connect to stations on 14.105 LSB, from my MHeard list, for a few weeks now without any success. I have everything configured to suggested parameters. I am using a windows 10 machine along with a rigblaster interface. This setup works perfectly with many other sound card clients.
--
Jesse Bertier, N1UGK
https://n1ugk.com
