开云体育

Please post your schematic. -Adam

Maybe I am referring to one of the Forbes ! The EPUT was an old tube device by Beckman I think. Was a big rack-mount thing with neon lamps behind a mask, or later interfaced this to nixies.

Take a look at this one, it's very similar to what I see: h

OK, you caught me. I am run

Unless you're referring to the nixie display, I never had a tube-based counter. The unit, which I still have, is an H-P 5221B "Universal Counter" that can measure frequency or simply count pulses (I

Hi Shane, I think that your problem is most likely one of two things: 1) Something is wrong with your output routine for pin 4. Different microcontrollers will have different pin setups. Read through

I added a LED from pin 4 to ground to test the circuit. 8 and 9 now work, so i suspect the Picaxe I am using is supplying an overvoltage, about 2.3V too much. Anyone care to confirm? Shane

I got at least two nixie tube counters from university lab clearouts, which seems to be able to do that.. Dan

Those types of counters do exist, and go way back to the nixie days. I got one. Its a CMC (not near it, so I don't have the model number), and its a 'universal' counter, that does frequency, period,

Hello- I remember you saying that you had problems with that once before. What browser & OS are you using? I'm trying to hunt down these bugs and I can't seem to reproduce that one :-/ I ran it

For me it's just the fun to use discrete components and to avoid software (may be the difference between you and me ;-) ). To me a ?P in a nixie or meter clock is the same as a quartz or DCF clocwork

Are you using IE older than ver. 7 or an other browser pretending to be IE? That page doesn't work with them. The prompt window indeed redirects to chrome regardless of the button pressed. Bad

My NIXIE Ballentine 5700A does not have any functions other than counting but some later counters have totalisation and period measurement. Steve -- Steve Rooke - ZL3TUV &

Still have that tube EPUT meter ? or was it dissected for a clock already ? [Non-text portions of this message have been removed]

I can't even view that page. First it gives me a popup asking me permission to download temporary fonts, then it gives me a script popup ordering me to "Get a new browser!", then it redirects me to

[edited by A.J. - please trim quoted material] <snip> Have you manually checked (by tying the pins to VCC and GND) that your 74141 will actually produce 8 and 9? [Non-text portions of this message

<snip> I'm still waiting for a previous, similar project discussed here a few times to come to fruition. Rather than using a frequency counter, it would use one of the older digital event counters and

I had a working one tube counter, a simple 0-9. I was using the Basic Stamp board. I moved to a Picaxe 08M, and now, it won't count past 7. I goes 0,1,2,3,4,5,6,7, dark, dark, 0,1,2,3,4... Anyone have

The kit site http://www.techkits.com/ got a call-out in Nuts and Volts magazine in the TECHknowledgey column.

Does anyone have any experience creating or using an IN-12 in eaglecad? I found the russian-nixies.lbr which includes an IN-12 part and claims to be compatible with the SK-136 socket..I'm skeptical,