On Mon, Aug 30, 2010 at 7:42 AM, john ginn <johnginn50@...> wrote:
On Mon, Aug 30, 2010 at 3:21 PM, gnuvvekaavaali
<[email protected]> wrote:
--- In NEONIXIE-L@... wrote:
"ian_6500" <ianmartinphotography@...> wrote:
Can anyone point me to a circuit diagram and/or a controller chip that
will let me build a clock that chimes on the hour? (One chime for 1
o'clock,
three chimes for 3 o'clock, etc.) I was thinking of using a solenoid to
ping
a piece of metal or energy chime... Thanks!
There are chine/ding dong ICs -SAE800, SAB0600. M602
There is also an alarm accessory to Raymond Weisling's
Geekclock which has a Chime circuit -
the "GAM module" from Raymond Weisling is waiting for the IC to be
finished,
spoke to him via email about 3 weeks ago, I got the four letter word clock
& GeekKlok from him about 6 months ago, just waiting on the IC to finish
the alarm side of it.
This is great, thank you everyone! I'm almost done with my first clock--I
got the chip and schematic here: I'll certainly
post pictures when it's ready. I made my own PCB for it using this very
helpful and clearly explained web site:
This method works really well!
-Ian
