开云体育

Thanks for the? replies.? I found 2.2.14 (even though it still is listed as .13 on the source pages) and have installed it. We will see if it resolves the problem. -- 73, Neil W?NRP

2.2.13 is broken and should be removed from your system. Use the current version 2.2.14. The last time I checked Dave's website still indicates 2.2.13 is the latest. Which is not the case. Robert

Hi Neil I remember this problem to do with flamp 2.2.13 maybe mid last year. Something about a wrong XML response or timing issue? Solved in my case at the time by going back to 2.2.12.4, but now

Lately I have been having recurrent problems getting FLAMP to transmit a file. I load the file into the transmit pane using either DnD or the Add button. Verify the speed, compression and other

now that I look at it, why are the sidebands not symmetrical at -30 dB? odd The huge spike at 100 Hz is the repeater PL tone output de k3eui

*On tonight's CCAR UHF FM net? (446.525) the net control took checkins with THOR32* *I don't think I've ever seen THOR32 on FM nets (18 tones sent one at a time at 32 baud) * *It was fast,

The joints at elbows, etc. are usually secured with a single sheet metal screw. Not a very good RF bonding, especially after a few years of rain. There is a strong possibility of arcing at the joint.

*? ?? RAIN? GUTTER? ANTENNA?? on upper HF bands* * * *I've been experimenting with a variety of HF antennas here at my new QTH at Crosslands Retirement Community in Kennett Square, PA. * *I

OLIVIA 8/250 Check-ins heard: AB1PH KJ7ZTF N7UWX WA1ZYN WF7D W1EEP KJ7ROX K7DV N0DAJ asking for fills ICS-213 via FLAMP NOMTV full copy of form W1EEP AB1PH Odd conditions here in NorCal.

I have a (3) Linux Ubuntu systems.? Raspberry Pi 400, older Dell i7, Older HP tower with Ubuntu server (still not setup). I love Linux. The windows machine has the ability (with much gnashing of

Windows also now regards just about all audio input devices as "Microphones", and will disable them during an update, on "Security/Privacy" grounds!. That causes all sorts of corporate grief with

Solution found see attached. After all that trouble re-loading driver, it was right in front of me.... Thanks Stan W8SRD

Thanks Bob, I'll giver a try. Stan W8SRD

Just a thought Stan. I have no direct experience of this. I remember that there was the need/warning to install the Icom USB/Codec driver before hot plugging the radio. Perhaps the W11 "migration"

Updated a couple screen shots. See attached.

Hi all, Since 2 days ago, FLDigi does not find the codec's for my radios. I'm connected to IC-9700 & IC-7300 via USB and the internal sound card of the radio's.? This has been working for better than

Is anyone noticing that the mfsk modes are now "missing" the LOWEST tone at the start of every transmission? I am not referring to the "preamble" tone (option) at 1500 Hz, and am not referring to the

that should be https://www.w1hkj.org

I am in the process of moving the entire w1hkj web site to be hosted at QTH.com. The new site is https://www.w1hkj.or Please visit the site and report any discrepancies, particularly misdirection of

Please note that you will no longer be able to reach me at w1hkj@....? That account has been closed.? I do monitor these groups: .? linuxham .? nbems .? winfldigi Thank you. 73,