开云体育

Any antenna that works is a good antenna.? With current propagation almost anything will work.? Mobile antennas (screwdriver, base loaded) in a home environment work.? Mag loop in the

I just keep telling the HOA it was a bird perch. [IMG_2759.jpeg] Doug Lynch W4DBL D: +1-321-415-2191 M: +1-478-318-2655<tel:+1-478-318-2655> E: Doug@... Port Orange, FL

For your rain gutter antenna ensure section are firmly connected together. I put a self taping screw through where sections overlapped because I was experiencing arching at 100 watts. I included the

* * *How good can a RAIN GUTTER be on HF bands?* * * *Since moving to a "retirement community" last year I have been searching for a reasonably good HF antenna.* *I have tried a few 10-20 ft

Thanks, everyone for your input. I’ve loaded the latest per Bruce's recommendation. I’m checking the RX/TX levels per my Signalink instructions. Hope to be there next Tuesday. Hope you’re

Jim, I would load the current versions of the FLdigi Suite of programs. They are: Fldigi V 4.2.06 FLmsg V 4.0.23 FLamp V 4.2.14 In the readme.txt, you can see what was changed? in each of the

I would be leary of FLAMP 2.2.13 [email protected]> wrote: -- 73, AB1PH Don Rolph

of course you can do this with your own radio receiver at home de k3eui

de k3eui? Barry Kennett Square PA Due to my high noise level (over S9) on 80m and 40m, I often will use the *REMOTE SDR*? at *k3fef.com* (NE PA) for digital sound card nets like the PA NBEMS or

2 year old laptop running Windoze 11, wiped and reloaded. Ready for fldigi suite. I’m currently running Fldigi 4.2.06 Flmsg 4.0.23 Flamp 2.2.10 All are well behaved and play well with others.

fldigi 4.2.06.27 development version available for testing Download at https://www.w1hkj.org/alpha/fldigi/ fldigi-4.2.06.27.tar.gz <https://www.w1hkj.org/alpha/fldigi/fldigi-4.2.06.27.tar.gz>

The last sound card to calibrate via the Fldigi WWV mode? is a 10 yr old USB Sound Blaster that has very low noise. I usually use this sound card with a RSPduo SDR (hardware) which tunes HF, VHF,

The modulation around the carrier is the PL tone sidebands of 100 Hz

Barry/KE3UI, Yes, build a mag loop. It's sharp tuning will allow you null out the noise. On twenty, Olivia 8-500 right now, 2003Z. Kraus/KC4ZGP

Thanks Ken. Only will effect local builds. I will post a 26 tgz in a few. David <jj1bdx@...> wrote:

When trying to build fldigi 4.2.06.25 on macOS 15.3.2 with Xcode command tools, the following error emerged: ``` CXX config_script/fldigi-create_default_script.o CXX

at https://www.w1hkj.org/alpha/fldigi/ fldigi-4.2.06.25.tar.gz <https://www.w1hkj.org/alpha/fldigi/fldigi-4.2.06.25.tar.gz> 2025-03-21 07:41 4.9M

Good Morning All, Our local net has been trying Flmsg ARQ mode. I noticed in the user manual the menu selection is different than my Flmsg version 4.0.23. The manual has a menu selection titled ARQ

I forgot to mention that the fastest Fldigi mode we regularly use on 2m and 70cm FM is 8PSK500F. That mode is super fast for transferring FLMSG and large FLAMP EMCOMM traffic like Severe Weather

*Setting up your 2m/70cm FM rig with an external Sound Card* *It is easy to under modulate or to over modulate an FM rig with an external sound card.* *If you can monitor your own signal, the old