Re: FLRIG automatically enables manual notch filter on my IC-7000
|
It did.
Amusingly when I unchecked it.
selected use Xceiver values.
closed FLRIG
ensured that notch filter was off on the IC-7000.
reopened FLRIG
- rechecked these boxes.
closed FLRIG
reopened FLRIG
it seems?to work as expected.
The notch filter seems to have been sticky.? And this seems to have unstuck it.
On Fri, Mar 29, 2024 at 2:30?PM Bruce Bohannon < ham.bo@...> wrote:
In FLrig under Polls, is the "notch" box have a check mark in it.
Bruce WA1YZN
On 3/28/2024 16:57, Don Rolph wrote:
?I?have been
using FLDIGI for close to a decade with my IC-700 controlled
via hamlib.
FLRIG
offers some capability which would be useful and I have it
connected and working.
But
...
When
FLDIGI starts it enables the manual notch filter at about 1506
Hz.? This of course kills any digital signal on 1500 until I
disable the manual notch filter.
I
looked thru the archives but couldn't find anything on this.
So
how do I get FLRIG to start up without enabling manual notch
filter on my IC-7000?
Thanks!
--
|
