NanoVNA software on windows 10 x64?

dk1vi All Messages By This Member #18 Hello to the group, I am impatiently awaiting my NanoVNA. Meanwhile: has anyone successfully run software V1.01 on a PC running Windows 10 x64? Almost all my PCs are running under this operating system. Have only one old, lame horse left running Windows 7, which is no fun. Another question: are there other resources for firmware updates, PC software etc. besides the banggood web site? By the way I have found some videos on YouTube explaining some features of the NanoVNA. They are in chinese language, but the pictures are almost self explaining. Regards Ernst
bartj All Messages By This Member #22 There appears to be a lot of nanovna information/files on the following github site. I have not gone though it myself but it may be of interest. toggle quoted message Show quoted text On Thu, Jun 20, 2019 at 5:25 PM dk1vi <dk1vi@...> wrote: Hello to the group, I am impatiently awaiting my NanoVNA. Meanwhile: has anyone successfully run software V1.01 on a PC running Windows 10 x64? Almost all my PCs are running under this operating system. Have only one old, lame horse left running Windows 7, which is no fun. Another question: are there other resources for firmware updates, PC software etc. besides the banggood web site? By the way I have found some videos on YouTube explaining some features of the NanoVNA. They are in chinese language, but the pictures are almost self explaining. Regards Ernst
Frank S All Messages By This Member #23 This stuff is old 2 years and older. There has got to be newer stuff somewhere toggle quoted message Show quoted text On 6/22/2019 4:37 PM, bart Johnson wrote: There appears to be a lot of nanovna information/files on the following github site. I have not gone though it myself but it may be of interest. On Thu, Jun 20, 2019 at 5:25 PM dk1vi <dk1vi@...> wrote: Hello to the group, I am impatiently awaiting my NanoVNA. Meanwhile: has anyone successfully run software V1.01 on a PC running Windows 10 x64? Almost all my PCs are running under this operating system. Have only one old, lame horse left running Windows 7, which is no fun. Another question: are there other resources for firmware updates, PC software etc. besides the banggood web site? By the way I have found some videos on YouTube explaining some features of the NanoVNA. They are in chinese language, but the pictures are almost self explaining. Regards Ernst
dk1vi All Messages By This Member #24 Yes, github is for programmers only ;-) I can load and execute NanoVNA V1.0.1 on my Windows 10 x64 laptop. Tried to load a s2p-file but get "Unhandeled exception". Was a standard s2p file as used by Ansoft Designer, so I do not know why it was rejected. So ist there anything special in s2p files used by nanoVNA? Any experience?
Frank S All Messages By This Member #25 My version only has 2 traces. I saw somewhere there is a 4 trace version. I'm not a SW person, I'm hardware I guess I'll have to reach out to some SW people I know toggle quoted message Show quoted text On 6/22/2019 6:02 PM, dk1vi wrote: Yes, github is for programmers only ;-) I can load and execute NanoVNA V1.0.1 on my Windows 10 x64 laptop. Tried to load a s2p-file but get "Unhandeled exception". Was a standard s2p file as used by Ansoft Designer, so I do not know why it was rejected. So ist there anything special in s2p files used by nanoVNA? Any experience?
dk1vi All Messages By This Member #26 If someone has created a s2p file from within nanoVNA software, please send it to me (pm) or as attachment, so I can try to load it. Then I can see if the problem is related to Windows or my s2p files.
dk1vi All Messages By This Member #27 Edited This is the resource we have been looking for: It has firmware updates, instructions how to update, manuals etc.
Hugen All Messages By This Member #33 I've updated the software and fixed this bug.
Frank S All Messages By This Member #34 What SW, and what bug? Frank toggle quoted message Show quoted text On 6/24/2019 12:50 AM, hugen@... wrote: I've updated the software and fixed this bug.
Hugen All Messages By This Member #35 Fixed the bug that nanovnasharp cannot work properly under a system such as French use "," to separate decimals.
Frank S All Messages By This Member #36 I was able to get v 1.02 working yesterday I did have a couple of hiccups, but go tit working. Thanks for you help. Not being a SW person, I'm lost if it doesn't work . I'm really impressed with the little guy.?? I have use much more expensive equipment, and this is good for ham work. I owned an HP VNA, but sold it toggle quoted message Show quoted text On 6/24/2019 8:42 AM, hugen@... wrote: Fixed the bug that nanovnasharp cannot work properly under a system such as French use "," to separate decimals.
David F4HTQ All Messages By This Member #62 Dear Gen ( i hope Gen is your first name) Glad to meet you in this forum. Have you planed to make this C# software open source ? I have the same question for the 900MHz NanoVNA firmware. Regards, David, F4HTQ.
Hugen All Messages By This Member #63 On Wed, Jun 26, 2019 at 01:47 AM, <f4htq@...> wrote: Dear Gen ( i hope Gen is your first name) Glad to meet you in this forum. Have you planed to make this C# software open source ? I have the same question for the 900MHz NanoVNA firmware. Regards, David, F4HTQ. There's no plan for open source nanovnasharp in the short term. The 900M firmware will comply with the gnu License and open source after fixing some errors.
[email protected] All Messages By This Member #71 Hi all :) On good news I have NanoVNASharp running under Linux ... bit of a play and got there ... But cant get the com port to forward through .. A problem lots have and i am sure when I am more awake I'll get wine there. Is there any plans for a native Linux version (I would be happy to help with testing and coding) as far as I mono would run this program quite happily just there is no support for winforms :( maybe a work around can be found. Failing that Is there a list somewhere of the serial commands and responses to adn from the device and I'll take a stab at a Linux client myself .. will take a while I expect. I am sure if I pile through the python script it is all there just hoping I might be spared that task :P
alan victor All Messages By This Member #78 Yes, it works fine. I have had no issue loading Touchstone snp files from my simulator tool and from the nanoVNA. I am running Windows 10. Note if you have the 2 track unit you will only process s11 functions like Smith, log mag, vswr, etc... if you have 4 track then you can process s11 and s21 data. If you read in a snp file you will be able to look at all parameters... I believe. I'll check to be sure that is true. Alan
alan victor All Messages By This Member #79 The PC SW reads and displays only S11, S21 so NO the full 2 port S12 and S22 would not be picked up. Of course, just exchange those rows and you got it. Alan
[email protected] #89 Has anyone been able to find an alternative program that works better than NanoVNASharp? It is severely lacking capabilities that the vna itself is capable of reading. An example is VNAJ .
Rudi All Messages By This Member #891 @tim Hello Tim, Could you please explain how you got nanoNVASharp to run under Linux/wine. What DLL's need to be included? The USB/serial port adoption is explained in: Regards, Rudi DL5FA
Brent DeWitt All Messages By This Member #898 I've only been using it for a week or so, but no problems on my Win 10 x64 machine (Win ver.1809). Have fun!
Harry McGavran Jr All Messages By This Member #1366 Edited If the 900M firwmare complies with the gnu License AND building the firmware from github only generates one firmware type, presumably the 900M version, does that mean that the other versions, (300, 800, "aa" versions) are NOT GPL????? I haven't found any way to compile the other versions from github without changing the code.

Previous Topic Next Topic

开云体育

NanoVNA software on windows 10 x64?