开云体育

Hello,

1 one-port box + adapter - initial version:


2 one-port box + adapter - modified version:


3 one-port box + adapter - modified version:

black : vna system
red : nanovna + 31 mm adapter
blue : nanovna - 31 mm adapter mathematically

r :

x :

Sincerely,

yin&pez@arg

you're needs to setup electronic delay compensation in the NanoVNA to eliminate that curve. it happens because your load connected with different transmission line length than calibration kit load.

For example, here is 500 Ohm load measured with NanoVNA. First picture is how it looks with no electronic delay compensation. And the second picture is how it looks with electronic delay compensation 242 picoseconds entered into NanoVNA. (242 ps = 15 mm connector)

NanoVNA software which allows to see series and parallel RLC charts, can be found here:

Hello,

Thank you very much for your interesting suggestions !

Sincerely,

yin&pez@arg

you can find electronic delay of transmission line with no match on the end with Group Delay screen. Then you can enter it in the ELECTRONIC DELAY menu in the NanoVNA.

Hello,

Thank you once more.

Sincerely,

yin&pez@arg