|
The following files have been uploaded to
the Files area of the [email protected] group.
By: W3DRM - Don <drmcroberts@...>
Description:
NanoVNA Menu Structure Map-version 1.0.45
|
Which specific developer and firmware version number is this guide for?
--
Doug, K8RFT
|
It's for DiSlord's release 1.0.45 for the H4
The H4 does not have a soft key to place the device into DFU mode like the H version has - the operator just needs to hold the jog sw in and power-on the device for that mode.
toggle quoted message
Show quoted text
On Friday, March 5, 2021, 7:32:46 a.m. EST, DougVL <k8rftradio@...> wrote:
Which specific developer and firmware version number is this guide for?
--
Doug, K8RFT
|
Hi Don,
first of all thanks for the really useful work!
I have an H4, firmware 1.0.45. In my unit, at the HOME menu, tapping CONFIG, before the voice VERSION i see the voice CONNECTION which leads to two other menu, Output config. and Speed config.
Thanks,
Tony, I0RKV
|
Sorry, being new to posting on groups.io, I didn't include sufficient info to distinguish the specific version this structure map was made from.
As one of the posters answered, the map was created from the NanoVNA-H4 using DiSlord's release version 1.0.45. Next time, I'll be a bit more careful when posting. Also, too bad there is a way to edit posts so corrections can be made...
|
On Fri, Mar 5, 2021 at 08:26 AM, Tony, I0RKV wrote: Tony, that's interesting, I don't have a "CONNECTION" menu item anywhere in my menu system. I rechecked it this morning to make certain I hadn't missed something. On the back of my H4, I see a HW version: 4.2 Don, W3DRM Hi Don,
first of all thanks for the really useful work!
I have an H4, firmware 1.0.45. In my unit, at the HOME menu, tapping
CONFIG, before the voice VERSION i see the voice CONNECTION which leads to
two other menu, Output config. and Speed config.
Thanks,
Tony, I0RKV
|
Don,
is too strange: we have the same version, 4.2 an same firmware. I taked some photo...Is also possible that exists two version of firmware with little differences with the same name.
Anyway f I have installed an SD card, 32GB in the existing internal socket of the NanoVNA, but I don't think that makes a difference.
Tony, I0RKV
|
On Fri, Mar 5, 2021 at 11:29 AM, W3DRM - Don wrote:
Also, too bad there is a way to edit posts so corrections can be made...
At the bottom of each post is a "menu" line. The third choice is "More". If you click on "More" under *your own* post, you can edit that post. -- Doug, K8RFT
|
On 06/03/2021 12:07, DougVL wrote: On Fri, Mar 5, 2021 at 11:29 AM, W3DRM - Don wrote:
Also, too bad there is a way to edit posts so corrections can be made...
At the bottom of each post is a "menu" line. The third choice is "More". If you click on "More" under *your own* post, you can edit that post. But getting one post after another after another labelled "Edited...." can get /very/ annoying for those of use using email! I have disabled that facility on the groups I manage, for the benefit of the members. David GM8ARV -- SatSignal Software - Quality software for you Web: Email: david-taylor@... Twitter: @gm8arv
|
David,
Thanks for the reply. I understand your position on this as it would definitely add extra traffic.
So, it simply reinforces the importance of proof-reading one's post BEFORE you hit the button to post it.
--
*Don - W3DRM*
|
On Sat, Mar 6, 2021 at 09:14 AM, David J Taylor wrote:
But getting one post after another after another labelled "Edited...." can get
/very/ annoying for those of use using email!
On posts I have edited, at the end/bottom there's a choice to save without sending, or to save and send. (I choose the 'don't send' one). And I have my group messages email set to "daily summary", so I only get one group email per day. Others may differ, but I have not found any topic that I needed to follow in 'real time'. Nightly is good enough. -- Doug, K8RFT
|
I belong to numerous other groups and none of those with message editing turned-on have the option to "Save without sending". All I see is "Save and Send", "Cancel", or "Delete". That must be another setting the group owner can make, if, they desire to do so.
--
*Don - W3DRM*
|
The ability to send the edited post or not is only available to moderators with the proper permission or to owners of groups.
Dave - VE3HTC / VE3DTR
toggle quoted message
Show quoted text
On Sun, Mar 7, 2021 at 11:27 AM, W3DRM - Don wrote:
I belong to numerous other groups and none of those with message editing
turned-on have the option to "Save without sending". All I see is "Save and
Send", "Cancel", or "Delete". That must be another setting the group owner can
make, if, they desire to do so.
--
*Don - W3DRM*
|
Message editing is disabled in this group. On purpose.
DaveD, co-owner
toggle quoted message
Show quoted text
On 3/7/2021 11:44 AM, Alfa 4078 (Dave Rypma) wrote: The ability to send the edited post or not is only available to moderators with the proper permission or to owners of groups.
Dave - VE3HTC / VE3DTR
On Sun, Mar 7, 2021 at 11:27 AM, W3DRM - Don wrote:
I belong to numerous other groups and none of those with message editing
turned-on have the option to "Save without sending". All I see is "Save and
Send", "Cancel", or "Delete". That must be another setting the group owner can
make, if, they desire to do so.
--
*Don - W3DRM*
--
This email has been checked for viruses by Avast antivirus software.
|
W7DRM - Don
David J Taylor
Alfa 4078 (Dave Rypma) 2006 SYG #4078