开云体育

My new analyzer stucks when I turn it on. Touch Screen do not work.
It generates error: si5351-init failed.
What is wrong?
Version 0.5.0
edy 555
Kernel: 5.1.0

On Mon, Jan 25, 2021 at 12:55 PM, <ossi.vei@...> wrote:

My new analyzer stucks when I turn it on. Touch Screen do not work.
It generates error: si5351-init failed.
What is wrong?
Version 0.5.0
edy 555
Kernel: 5.1.0

You probably got a device from the first production, the fault of which was that the cover was pressed against the touch screen and due to constant pressure it could not log in either.
What to do: Unscrew the cover and place a plastic washer (0.5mm) on the screw towers and screw the cover back on.
Hopefully I guessed well.

73, Gyula HA3HZ
--
*** If you are not part of the solution, then you are the problem. ( ) ***

Since the firmware was made a year ago, please update the firmware to the latest 1.0.45 so that you can use it with the latest software. NanoVNA-App v1.0.205. Read my website for details.
--
*** If you are not part of the solution, then you are the problem. ( ) ***

Good morning!

Thank you for answer.
I uppgraded analyzer to version 1.0.45. DfuSe prongram say that upprade
succesfull. But when I press: Leave DFU mode, I get little little alarm
window as you can see the picture with this messace. Analyzer display is
nearly dark, see the picture.
Any idea whats wrong?

73!
Ossi

ma 25. tammik. 2021 klo 15.22 Gyula Molnar <gyula.ha3hz@...>
kirjoitti:

Hi Ossi,

DfuSe: Upload vs Upgrade

Upload refers to backing-up (ie: reading) the device's firmware TO the PC and saving it to a local file.
Upgrade refers to flashing new firmware INTO the device from a DFU file on the PC.


--
*** If you are not part of the solution, then you are the problem. ( ) ***

The si5351 is damaged. This NanoVNA-H4 may be a clone. I suggest you contact the dealer to replace it.

Hi!
I have same idea.
Thank you!

73!
Ossi


ti 26. tammik. 2021 klo 13.38 Hugen <hugen@...> kirjoitti:

Folks,
In order to make the DeFuse GUI better understandable, I created a version with better command labels.
You can find it in thew forum's FILES section here:
/g/nanovna-users/files/Miscellaneous
Follow the instructions in the zipped file.
...Larry

the switch to turn on has 3 postitions look at top