开云体育

We’d just toss them – Sent: Sunday, February 28, 2021 8:58 AM To: [email protected]<mailto:[email protected]> Subject: Re: [nanovna-users] Bad Cable In the lab, whenever I find a

In the lab, whenever I find a defective cable I cut off the end so that someone doesn't pull what looks like a perfectly good cable out and try to use it.

Over the last year I have purchased some useful USB-rechargeable devices (flashlights, bike lights, battery packs, etc...), and all have come with USB cables for charging. I have re-learned recently

as I though by default, it would still be one direction two ports as v2.2, but I might miss something, could anyone please clarify? BTW, is v2.4 more like an over clocked version of 2.2? regards

Seems the EU group that recently made a new coax assembly for the Space Station or the Astronauts themselves could use a nanoVNA. They replaced the coax between the Kenwood TM-D710 and antenna causing

Was it a charge only cable or actually a BAD data cable?

I thought heat, like from a hair dryer, was the way to loosen tape like that. I know they use it for phones.

Hi Max, We already know that the base unit does not have a -H (2.8 "screen) but a 4" screen NanoVNA-H4 with firmware 1.0.39. Now all you have to do is find out from the person asking the message what

I had one of these cables recently and I put it in the bin because of that same scenario you had. Regards, James.

Hi Zack, that was going to be my very next suggestion if none of the suggestions I made worked. Great result. Kind regards, James.

Thank you, will try the suggestions. It is the H4. Max

USB cables are meant for quick insertion and removal by consumers and are backed by the compliance requirements published by USB Alliance. However electronic products are now made to sell more than to

I'd suggest reinstalling update to see if problem persists, Can't hurt one of em'.

What PC software are you using. Is it NanoVNA Sharp? Are you using a NanoVNA-H (2.8") or NanoVNA-H4 (4"). If using a NanoVNA-H4 sweep points should be set to 101 for some PC programs. Roger

I have more than 50 years experience with audio, auto, computer and aerospace electronic systems and slowly moving into the 21st Century with this fancy electronic stuff like nanovna.. One thing I

Hi all, I'm running version 1.0.39 on a Nanovna H model. When connected to the PC, Every time I run an SWR scan "Get Data" I get the following errors: Corrupted data received [data 0]. Would you

Great Idea!!! tl will help me a lot as I keep dropping those!

That was NOT the case here. I had used the very same cable some time ago to reprogran the firmware to the NanoVNA several times. Now it doesn't work. Cables go bad. At least I solved the

Salute! I am new NanoVNA-H user. Sorry,my English is very poor. I am industrial electrician in the dairy

Some of them are for power only, for charging….. Sent: Saturday, February 27, 2021 5:54 PM To: [email protected]<mailto:[email protected]> Subject: Re: [nanovna-users] Bricked