That was NOT the case here. I had used the very same cable some time ago to
reprogran the firmware to the NanoVNA several times. Now it doesn't work.
Cables go bad. At least I solved the problem.
Zack
<>
Virus-free.
www.avast.com
<>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
toggle quoted message
Show quoted text
On Sat, Feb 27, 2021 at 5:01 PM Gene Rozea <gene_rozea@...> wrote:
Some of them are for power only, for charging¡..
From: Zack Widup<mailto:w9sz.zack@...>
Sent: Saturday, February 27, 2021 5:54 PM
To: [email protected]<mailto:[email protected]>
Subject: Re: [nanovna-users] Bricked NanoVNA-H
Well, on a weird suspicion, I tried a different USB to mini-USB cable
between the computer and the NanoVNA. Suddenly, everything works. So the
trouble was a bad cable. That was the only thing I hadn't tried up till
now.
Zack
<
Virus-free.
www.avast.com<>
<
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Sat, Feb 27, 2021 at 2:14 PM James Anderson <james21170@...>
wrote:
Hi Zack.
Is there any kind of STM device listed in either Universal serial bus
controllers OR Universal serial bus devices within device manager when
you
have your NanoVNA connected.
Kind regards, James
