开云体育

Integration is only slight in this comparison (145MHz helical filter) because the noise level is fairly low near the noise floor.

I've just changed the memories slightly in the PC software, they are no longer wiped. I no doubt will alter how they work etc over time. The markers or mouse aren't yet used on the three memories,

I forgot to ask. What exactly does the "INTEGRATOR" do?

Thank you! It's working really well!

The option to load s1p and s2p files into the 3 memories is available and also the memories are now kept when you start/stop scans, but they are still currently wiped if you alter any of the frequency

Hi DiSlord, I'm running the v1.0.3 H4 beta and noticed that after a few minutes the VNA freezes when on the version page. Not sure if you've ran across that issue yet. 73, Brian

If you live state side I would be more than happy to repair it for you. I did my own PCB repair before retiring and NASA certified to play with soldering irons. Good luck, Vidas

I hope you mean 201 and 501 points etc? ============================================= ... (200 points/s) ... ... (500points/s).... Dave, I think you confused number of measurement points with sweep

On Fri, Jul 31, 2020 at 04:59 AM, Dave_G0WBX wrote: I hope you mean 201 and 501 points etc? ============================================= ... (200 points/s) ... ... (500points/s).... Dave, I

Re:- - V2-N - this is still 2.8 inch and will replace the V2, and will feature 2x faster sweep (200 points/s) and lower trace noise. It will be ready in 1 month. - V2-N4 - this one is 4 inch, and

Desoldering is very easy if you use a bismuth solder wire. Chip Quick sells a smd removal kit with flux, bismuth wire and cleaning pads. It has a very low melting point, just flood the soldered pins

Very good! In the future comparing S1P and S2P data may be interesting. Compare data obtained on different dates. The same for "set memory". I realize that the memory only exists while "scan" is

But my main aim is to try and keep everything as responsive and simple and easy to use as possible, I don't want to start adding sub-windows upon sub-windows etc to alter some hard to find setting or

I'll get it to pop the image up like what nanvovna-sharp does when you take a capture, would help in deciding whether to save it to not-so-floppies or not.

====================================== Thank you!! The screenshot is working !! 73 !!

Thank you for correcting my notes on this, Gabriel.? Sorry for the misunderstanding.? ... Larry On Fri, 31 Jul 2020 at 12:34 AM, Gabriel Tenma White<OwOwOwOwO123@...> wrote:

Great news Gabriel. I hope the last item is a typo and it should read a full two port 6 GHz.... ;) I don't mind the display!

Gabriel, Thanks for the information! I hope you are passing on the consensus from this group, that there is no sense producing a product without a case, and without a 4 inch screen (for those

The dots n commas problem was fixed a few days ago, it really isn't a problem, just appears that all VNA's send the decimal point as a full-stop/dot no matter where a person lives, which sometimes

Hi Clif I hope you are well now and still have the kenwood ts-2000, some of us with the nanovna-f have had the battery move and destroyed , please open the unit and change from cable ties to