Desoldering is very easy if you use a bismuth solder wire. Chip Quick sells a smd removal kit with flux, bismuth wire and cleaning pads. It has a very low melting point, just flood the soldered pins with this solder. It mixes with the existing solder on the board and keeps it melted for many seconds. Highly recommanded.
Op 31-7-2020 om 09:50 schreef alperbulus@...:
toggle quoted message
Show quoted text
Thank you very much for detail instructions, I didn't realized that metal shield can be removeable , but now I can easily reach to PCB so good soldering job will complete the mission, after that I ll be print one of those SMA supported case .
Thanks again
