开云体育

I have the circuit below, I built to remove Common mode signal from a 225ft CAT6 Feed LINE. It works extremely well. So now I want to know what loss I have put just before my radio. (The 225ft feed

Great, tnx for the lead. With the saver sw working fine, I should be good to go, makes sense rich

I agree with much of what you have said. In the days before the Internet it was a real struggle to find a textbook or magazine article which covered a subject of interest. Nowadays there is a plethora

Thanks...

No, it isn't "you just gotta know". Those of us who actually spend the time and make the effort to find an engineering sound reference online which everyone can access to answer the question(s),

Yes, I think I'll order from Mouser, Newark or Digikey - they have them for around $10ea (I tried to save $$ but....)

The traces on the LCD flex circuit can crack if the flex is bent at a right angle. Also, a few other forum members have seen this issue - they carefully removed the LCD (just release it from the metal

Its the activity LED that's flashing, always. Just tried the usb path and yes that's ok, so a display issue does appear to be the issue, just ran a few sweeps and ok except for screen still white.

I’m just asking in parentheses why don’t you buy from a reputable seller? With us, farnell is a good name. -- *** If you are not part of the solution, then you are the problem. ( http://ha3hz.hu/

I guess I am just the opposite. I'm a smart guy and good at figuring things out. I will spend literally hours searching high and low for information before I break down and ask someone. I almost

Which LED is flashing - the charge or the other activity LED? The activity LED flashes as a sweep is occurring. If you're only getting a white screen, check that a solder connection under the LCD has

Hi Bruce, This forum is run by Amateurs for Amateurs and the Wiki and Files sections have been put together over time (the forum is 1 year old now!) from questions that were asked and answers that

hi Gyula, tnx for the info on your site on different models. Was there something there related to the problem I posted that maybe I missed?

Gary, This is something that I have issues with, too. It reminds me of the day, way back in the day, when I asked someone where I could find documentation regarding the Unix operating system. This was

Well, unfortunately it appears I was sent a defective STM32F303. I removed it and put the original F072 back and my Nano is working again. I thought I might have a problem when I saw that the seller

Hello, What I have not seen up to now is a *permission* problem fix with the access to the USB serial port (nanoVNA). What to do: # Add user to group dialout, for USB-Serial access. $ sudo usermod -a

Finger mistake 20Log(10)(1/67) = –36dB

Weird! I tried get it working on my Windows PC, and everything seemed to be going fine. However, while using the calibration assistant built-in to NanoVNASaver, I had a similar crash due to pyserial.

Although I got my NanoVNA back in ?February? I have not taken time to work with it much. I did purchase a bag with ?10? PCB edge mount SMA connectors and after yesterday’s traffic about “NanoVna

Lee, When accessing web links, if you find a dead link, go up one level to see if anything has changed. If you look at http://gunthard-kraus.de/fertig_NanoVNA/ You will see there is a German and