开云体育

This group is active and has 7310 members. I searched for your name "Anne Ranch" and do not see you listed as a member. I am active in this group and do not recall any posts from you. Roger

...and one wonders why a person might be removed from a FB group.

Little over statement in the title , but ... Again - started using the nanoVNA , to tune antenna, about two weeks ago and 1. it is HOT in Huston and impossible to read the display in direct sun 2.

If you want to come back where you last were, and no memory 0, on the later firmware(s) there is an advanced option "maintain state" that will cause the device to power back on exactly as it was

Let me restate - I have been actively using nanoVNA for about two weeks - and I am a certified engineer and real engineers do not read manuals... Consequently I make mistakes , because I only read

There are at least 2 different screen types, too, I believe. I started with a very early 2.8 inch model but just could not use it outdoors. The screen was essentially unreadable in bright light,

It's the "etc." that troubles me. Where do we find exactly what is saved for our firmware release?

Actually, as I understand it, the NanoVNAs evolved from a hobby to merchandise. The story is prolly on the web for you to find. More to the point, now, I suppose, is how each of us can use them

Anne, I suggest contacting the group owner of the Facebook group. It's possible that in the process of making the group private, they made some mistakes along the way and lost members unintentionally.

SAVE also saves the enabled traces, their format and scale, etc. So you can set the frequency range, number of points, traces, markers, etc., then calibrate and save, and when you recall that slot you

Anne, My knowledge and experience is limited, but SAVE 0 is loaded at power up each time. This is a good place to save the calibration data for the setup you use most often. Anything else you want to

If you were subscribed to it, you should stolii see its name in your subscribed groups, even if you can’t access it.

Rich, what is really puzzling - assuming that the original intent of father of "nanpXXXX" was to make money - why is internet full of "wannabe" experts publishing and mostly copying stuff with little

Id you can get dfu mode, then go into dfu mode and reload it. -- Sent from my Android device with K-9 Mail. Please excuse my brevity

Although this discussion is a bit old I thought I'd give it a try, mostly because my SAA-2N has the same page on Config view, 20200617 and 1a9a11d. While trying unsuccessfully to update the firmware,

Anne, since there appear to be several Facebook (FB) groups related to nanovnas, it is impossible, for me at least, to know which FB group you are, or were, using. The is no direct relationship

The following files and folders have been uploaded to the Files area of the [email protected] group. * /user manual and menu maps/nVNA-H4 v4.3_MS, firmware 1.1 User Manual 0102.zip (

I am in complete empathy with what I understand you to write. I was disheartened that so much time has passed with these devices on the market, and so little written by those who purport to be in the

Thanks Jim! Op di 7 jun. 2022 om 22:16 schreef Jim Lux <jim@...>:

On 6/7/22 1:14 PM, Jim Lux wrote: > On 6/7/22 10:30 AM, Victor Reijs wrote: >> In the meantime I found a document: >>