开云体育

Hi, Follow the instructions in the manual to put the NanoVNA-F in DFU mode. This involves pressing and holding the jogwheel or button while powering the unit on. The screen will be blank. On a Windows

I understand that the system needs clocks like 48 MHz (USB), etc. But in the datasheet of Si5351A, it mentions that, 1. Generates up to eight non-integer-related frequencies from 2.5 kHz to 200 MHz 2.

Is it a passive crystal or an oscillator? A passive crystal may still work fine, but some parameters may not be guaranteed for all parts. External oscillator will work over much wider range. 10MHz is

Normally, you don't need a working display for flashing. Read page 37, chapter 8 of the V2 user manual. It explains how to flash. If that doesn't work, have a look at the many posts in these groups,

Hello Raymond, How to recover?and and flash the NanoVNA?it will not turn on the screen is Dark, thank You

YouTube Keysight Labs U N L I S T E D https://www.youtube.com/watch?v=qjYjTMNJb8c

It works here. Thank you very much.

ISTR the latest is version 0.5.0 or so. Definitely nothing with a 4 in it. I saw it on the Sysjoint site the other day. Make sure to choose the correct device, apparently F V2. There’s also an F V3

Hi, You can search for it on Keysight webpage, I found it, but I don't know if link will work here:

Is there any way that I can reset the SYSJOINT?NanoVNA-F V2 to it's original firmware setting, Thank You

Yes I believe it is .4 for the?NanoVNA-F V2?according to SYSJOINT

Did u upload the correct FW for the specific VNA ?? [email protected]> wrote:

Thank you! ?n lun., 11 mar. 2024 la 11:42, gin&pez@arg <gin.pez.arg@...> a scris:

Hello Group Members I have a SYSJOINT NanoVNA-F V2 that was working perfectly until I tried to update the firmware to the latest version from SYSJOINT, when I copied the Bin file to V2 it loaded, the

Depend from used IF, 12k More easy get this step. IF depend from ADC speed, ADC from ... USB 48M

You will likely want to pose this question on the "NanoVNA-F & DEEPELEC" and/or the "NanoVNA V2 Users Group" groups.io forums. DaveD -- This email has been checked for viruses by Avast antivirus

Hello, Does anybody know why in the design of NanoVNA-f V2, a 24 MHz crystal is used for Si5351A? In the datasheet of Si5351A it is mentioned that the chip shall be driven by either 25 or 27 MHz

Cannot register. ??? This event is not recognized by Keysight Chuck K4TZO -- Chuck Cole ?K4TZO

Two Rare HP Manuals 1/2 "Vector Measurements of High Frequency Networks (Paul Schmitz) April 1989 HP 5958-0387" HEWLETT (hp) PACKARD "Vector Measurements of High Frequency Networks" [*] (probably by

https://rfmw.em.keysight.com/webinar/Network-Analyzer-Fundamentals/Network-Analyzer-Fundamentals.html