开云体育

David, Thanks for the info! I am investigating the LiteVNA 64. Ed, K0KC

Thank you for the reply. Loading back to the oldest 0.4.5-4, has brought me back to the original status as my son and I got it a year ago as per the attached image. I have not been able to find the

More info. I can still attach as via serial and get the info from the board. Basically it seems to be coming up, but not working on the touch and jog wheel. Board: NanoVNA-H 4 2019-2021 Copyright

NanoVNA's made by Hugen with a 2.8" screen are -H and with a 4" screen -H4. Copies or modifications of his PCB layout and circuit design often use the -H/H4 markings but are not the same PCB layout

On 24/02/2023 17:32, Ed Wilson via groups.io wrote: > I currently own a NanoVNA SAA-2N and a NanoVNA-H4. The SAA-2N has a maximum frequency of 3 GHz and the H4 has a maximum frequency of 1.5 GHz. > I

I currently own a NanoVNA SAA-2N and a NanoVNA-H4. The SAA-2N has a maximum frequency of 3 GHz and the H4 has a maximum frequency of 1.5 GHz. I have recently been experimenting with circuits in the

Rtc adding is easy.. Just needs the xtal Am 24.02.2023 14:34 schrieb Bob Ecclestone VK2ZRE <becclest@...>:

Hello Fred, Re the "new version" of the -101, I think you are getting confused by his comment (in red) on the DeepVNA-101 page stating "2022 New version. Added Rotary Encoder and RTC functions". This

Ok Just to clear up my previous message. It is a NanoVNA-H as marked on the board but it is the unit with the 4" screen, so using the NanoVNA.H4.v1.2.00.dfu is correct. As for the other comments that

Al - My flagpole antenna would be for portable, temporary use such as Field Day and Parks On The Air. And the price is a major concern - there are $1200 20 foot flagpole antennas, but not for me!

Where does he imply a revision to the hardware? I can't find anything like that. Can you give the URL where you saw it? Actual hardware changes are relatively rare. The firmware, however, seems to be

Fred, The same folk released the "DEEPSDR 101" radio receiver with a number of defects which were widely discussed and reported. In spite of many (polite) requests there has been no firmware update

Yes, I found it. I needed to go to "more" and reread the entires. I found Node with "MS5351" and "Si5351" as options. I chose MS5351. Not where I expected it - especially with the number attached to

Hi Using Ubuntu Linux, I use dfu-util -a 0 -D * * go to my Downloads directory and copy the file name This then puts the filename and path into the terminal command Then just press Enter - and voila!

Isn't it in the expert settings?

Thank you again!! Worked like a charm! I don't see where I should tell within the Firmware I have (M) type. I have: Hardware version 4.3_MS . Again, thank you! larry

Thanks Bob (VK2ZRE) - very helpful comparison, much appreciated! I looked closely at the DeepVNA-101 web pages, but couldn't find the screen resolution. It is listed for the older "F" model, so I

Just take the bin from my repo, I create them from DiSlords latest GitHub commit, see this message: /g/nanovna-users/message/30480

I looked at the HF flagpole and decided I wanted something a little better, at least more in line with my want list. I wanted a halyard to raise and lower the flag, since the W6NBC article and

In the Mac Terminal, I use use: dfu-util -a 0 -s 0x08000000:leave -D tinySA.bin to update my tinySA. I like using the terminal as opposed to yet another GUI. I would like to use the same for updating